How do I log into my sky Broadband router?

Steps for logging in to your Sky WiFi Router:

1. Browse to 192.168.1.1 on your internet browser.
2. You will come to a login screen. Enter the username and password from the sticker on the bottom of your Sky WiFi Router.
3. If you’ve logged in successfully, you’ll see the web interface home page (as seen below) Related Articles.

What is the default modem password?

admin
The router’s default password is “admin” as for the username, just leave the field blank. IMPORTANT: Make sure that the Power LED of the router is blinking when you press the Reset button. This indicates that the router is being reset properly.

How can I recover my 192.168 1.1 password?

What can I do if I forget the login username/password of my DSL modem/router?

1. Step 1 Turn off the router.
2. Step 2 Press and hold the reset button on the rear panel with a pin, then turn on the router.
3. Step 3 Release the reset button and wait for the device to reboot.
4. Note:

How do I access my sky Hub?

In a browser address bar, go to 192.168. Enter the default username admin. And depending on which hub you have, the password sky or the WiFi password on the back of your hub.

How do I find out my sky username and password?

How do I log in to my router settings page? Open your browser and type 192.168. 0.1 into your address bar. When prompted enter the username: admin and password: sky OR, your WIFI password.

How do I reset my Sky Broadband?

The Sky Broadband Hub reset works a little differently. To do this, first press the reset button down (located on the back of the hub). Then wait until the power light flashes off and on (should do this four times) before remaining on. This whole process takes about ten seconds.

How do I Reset my Sky Broadband password?

You’ll be disconnected from your network after pressing the reset button. To connect again, use the default router’s wifi name and password, usually located under your router. Try accessing the GUI again using the default Sky broadband username and password. 5. Click on “Primary Network” from left side then change your WiFi name or Password. 6.

What is the IP address for Sky Broadband?

Check the default gateway ip address usually starts at 192.160.X.X. Use the ip address to access your router’s GUI. 3. Enter the default Sky broadband GUI’s username and password below: 4. Select “Wireless” option from main menu. Or select “Wireless settings“, “Setup“, or “Change Wireless Password” depending on your router type.

Where do I Enter my Sky Hub password?

In a browser address bar, enter 192.168.0.1. Select Wireless. Enter the default username admin. And depending on which hub you have, the password sky or your WiFi password.

How to change Sky WiFi name and password?

Just follow these steps: 1 Locate the “Reset” button at back of the router. 2 Press and hold the Reset button for 6-10 seconds. 3 Wait for LED lights to light up. 4 You’ll be disconnected from your network after pressing the reset button. 5 Try accessing the GUI again using the default Sky broadband username and password.