How do I install iView digital converter box?

Plug an HDMI cable into the HDMI OUT port on the back of the iView and plug the other end into an HDMI port on the TV. Take note of which port on the TV you plugged it in to. Turn on the TV and change the source to the HDMI port you plugged the HDMI cable in to. Plug the iView into an electrical outlet.

What is an iView converter box?

Get Digital Broadcast for your Analog TV The iView 3500STBII is a digital converter box scans for digital channels using its built-in ATSC tuner and QAM compatible. It takes a few minutes to setup and you won’t have to replace your analog TV. You may even get to see local feeds in HD!

How do I connect my digital converter box to my TV?

Using the coaxial wire that comes with your Converter Box, plug one end into the “Out To TV (RF)” port on the Converter Box. Plug the other end into the “Antenna In (RF)” port on your TV. Plug the power cords on your Converter Box and TV into a power outlet, and turn on your TV and Converter Box.

How do I connect iView to my TV?

To set this up, use the following steps:

1. Press the Smart Hub/Home button your Samsung TV remote.
2. In the Smart Hub Home Menu, select Apps.
3. Select My Apps.
4. Select Options and make sure Auto Update is set to On.
5. If you don’t want the apps to update automatically, set Auto Update to Off.

How do I program my iView remote to my TV?

Setup Buttons Guideline for 3500STBII:

1. Press “SETUP” for 3 sec till red light turns on.
2. Press “POWER” in TV area within 10 sec till red light flashes.
3. Press”POWER” of your TV remote for 3 secs and point LED sensor directly to 3500STBII remote within 3cm distance till red light flashes 3times and stays red.

What is an IView?

IView or iView may refer to: ABC iview, a video on demand and catch up TV service run by the Australian Broadcasting Corporation. IrfanView, an image viewer, editor, organiser and converter program. iView Media, a commercial digital asset management cataloging program. IView Multimedia, a former software company.

What is a QAM digital tuner?

QAM Tuner (REQUIRED) QAM (quadrature amplitude modulation) is the format by which digital cable channels are encoded and transmitted via cable television providers, including Apogee. A QAM tuner is the cable equivalent of an ATSC tuner which receives over-the-air digital channels broadcast by local television stations.

Does a converter box need an antenna?

Does a converter box need an antenna? Yes. You are going to need a broadcast TV antenna to use a converter box. There are many indoor antennas that you can choose from, but first, you need to make sure you can get a signal where you live.

How do I know if my TV needs a converter box?

Check the specs on your TV using your model number. If it has an ATSC digital tuner, an external converter box will not be needed. If the TV shows an NTSC analog tuner only, then a converter box will be needed.

Why can’t I get iview on my TV?

ABC iview is no longer supported via the web browser on your TV. If you want to watch ABC iview on your TV, the ABC iview Smart TV app is available on the following Smart and connected TV devices (be sure to check that ABC iview is available on your specific model before purchase): Samsung TV. Hisense TV.

Why is iview not available?

Ensure that you have the most current system firmware installed on your TV; or, use the system menu to refresh internet content. Delete and reinstall the ABC iview app. Turn your modem and TV off at the wall for a few minutes, switch back on again. Complete a factory reset of the TV and relaunch the ABC iview app.

How does the iview 3500stbii digital TV converter work?

The iView Digital Box works great in OTA. Once plugged in, the 3500STBII gives you a wider range of channels you can view, with noticeably higher picture clarity. Just take the converter out of the box, connect to your antenna line, and you’re ready to go. Connect your TV via the RCA, YPbPr or HDMI port.

Is the iview 3500stbii a QAM compatible box?

With iView, you get a box that works with both OTA signals is QAM compatible to give you the best of both worlds. You can get free high definition channels with the iView 3500STBII unit. You now can choose to view TV content in your preferred format- whether it be 576p, 720p, 1080i or 1080p.

Is the iview converter box compatible with analog TV?

The iView Digital Converter box automatically converts the signal to be compatible with your analog unit. Analog TV owners won’t need to get themselves a new TV if they don’t want to.

What can I do with an iview digital box?

The iView Digital Box comes with a remote control device that gives you basic functions such as setting a Favorites list, accessing Parental Controls, switching channels, powering the 3500STBII on, off, etc. It also gives you options to display subtitle, show the signal quality, the electronic program guide,…