How do I fix code E on my Honda Accord radio?

error means that you have incorrectly entered the radio code more the 3 times and it has locked you out….

1. Make sure the radio is off.
2. Press and hold the “1” and “6” preset buttons.
3. Turn the radio on while continuing to hold those two buttons.
4. Record the serial number.
5. Turn on the radio.
6. Enter the code.

How do I get the radio code for my 1999 Honda Accord?

Press the preset buttons 1 and 6 at the same time while turning on the radio. A 10 digit serial number will appear on the radio display. If you have a 2001 or older Honda the serial number is located on the body of the radio unit. the radio unit will have to be removed to see the code.

How do you reset the radio on a 99 Honda Accord?

How to Reset My Honda Radio After Putting in a New Battery

1. Turn the ignition key to the “On” position, but don’t start the engine.
2. Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display.

How do I unlock my Honda Accord radio?

Once you secure your Honda Accord radio code, entering the is the easy part. Enter the code using the radio preset buttons. So, if your Honda Accord audio system code is “33351,” you would press “3” three times, “5” once, and “1” once. This should unlock and reset your car’s audio system.

How do I get rid of error E on my Honda radio?

If the radio displays and error (ERR) message, disconnect the black negative under hood battery cable for 1 to 3 minutes to reset the system). TURN THE RADIO BACK ON AND LOOK FOR THE WORD “CODE”. ENTER THE 5 DIGIT RADIO CODE. THE RADIO SHOULD COME BACK ON.

How do I reset my Honda radio error E code?

How do I reset my Honda radio code?

Complete the following series of steps to reset your radio code:

1. Turn the vehicle ignition to ON or AUX, but do not start the engine.
2. Turn on the radio. The radio should show the word CODE.
3. Enter the five-digit code, and the radio should return to normal.

How can I bypass radio code?

Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.

How do you unlock a car radio with a code?

With the Unlock Code

1. Locate the anti-theft/unlock code. Most cars have a special anti-theft radio card that is included with the owners manual packet containing the unlock code and serial number.
2. Turn the car’s ignition switch to the “on” position. This turns on your car’s electrical system and powers up the radio.