How do I drain my LG front load washer?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water. Another way you can drain the water is by turning off your washing machine and unplugging it from the outlet.

How do I drain the water from my LG washer?

If it is necessary to drain the water from the washer, power the machine on and press the spin speed key until no spin is selected then press start. If done correctly, 1 minute of estimated time will display on the clock, the unit will drain out the water, and the cycle will end. Best regards.

What cycle drains the washer?

rinse cycle
One of the principal functions of a washing machine is to drain the used, dirty water and replace it with fresh water during the rinse cycle. After clothes are rinsed, the washer drains again. To perform these actions, a washer uses a pump to remove the water from the tub through a drain hose.

How do you force a washer to drain?

How to Manually Drain a Top-Loading Washing Machine

1. Step 1: Turn off the power and lay down towels.
2. Step 2: Locate the drain hose at the back of the washing machine.
3. Step 3: Drain the water.
4. Step 1: Turn off the power and lay down towels.
5. Step 2: Locate the drain hose.
6. Step 3: Drain the water.
7. Step 4: Scrub the filter.

Why wont my LG washer drain?

The OE error code on the LG washing machine display is an indication of a NO DRAIN issue. The 3 issues that may cause this fault code is a bent drain hose, the drain pump filter is blocked, or the drain pump may have foreign objects lodged in it making it unable to drain.

Why is my washing machine not draining?

The most common cause of a washer not draining is a clogged water pump or drain hose. It is not unusual for small clothing items like socks or rags to get pulled into the machine’s drain system and block the hose going into the pump. They may even clog the water pump as well.

How do you drain water from a washing machine?

Pull the washing machine away from the wall, if necessary, to access the drain hose. The drain hose is usually found on the back of the washer, along with two separate hoses for both cold and hot water supply. The drain hose carries wastewater out of the machine, while the hot and cold water supply hoses bring clean water in.

How do you replace a washer drain hose?

How to Replace Your Frigidaire Washer’s Drain Hose 131268800 1. Unplug the washer and turn off the water connection. 2. Remove the lower access panel. 3. Remove the drain hose. 4. Remove the back panel. 5. Remove the drain hose. 6. Switch the clamp over to the new hose. 7. Insert the new drain hose. 8. Reassemble the machine.