Useful tips

How configure PLDT my DSL modem?

by Rhyley Bryan

How configure PLDT my DSL modem?

You can access your modem settings by:

  1. Step 1 – Open Internet Explorer (or Microsoft Edge, Firefox, Chrome, Opera)
  2. Step 2 – Type in http://192.168.1.1.
  3. Step 3 – The default password or login details are:
  4. admin.
  5. adminpldt.
  6. Step 4 – enter the corresponding values.
  7. Step 5 – Save or apply the settings.
  8. Step 6 – Reboot your modem.

How do I access my PLDT router settings?

Enabling the Admin Account Needed to Configure a PLDT Router

  1. Open your internet browser.
  2. Type in or copy and paste the Username and Password as shown above, f~i!
  3. Under the Device Management menu, click the “Debug Switch”.
  4. Enable the “Web Admin Switch” by clicking the radio button labelled “Enable”.

How connect PLDT modem to wireless router?

Step by Step Guide

  1. Step 1 – Connect the two routers. Connect one end of a LAN ethernet cable to the primary router and connect the other end to the secondary router which will act as an access point.
  2. Step 2 – Change the IP address of the second router.
  3. Step 3 – Configure the DHCP server.

Why I Cannot access my router?

If you still can’t connect to your router, make sure any software firewalls are disabled. These might be part of your antivirus or internet security software, or a standalone application such as ZoneAlarm. Temporarily disable these to see if they are causing the problem.

Why can’t I log into my router?

If you still can’t log into your router’s firmware, you’ll need to reset the device to revert all settings back to their defaults. You’ll usually find a small reset button on your router. You should now be able to log into your router using the default username and password.

How do I connect my router to my main modem?

Connect one end of one Ethernet cable into the back of the modem, then connect the other end into the Wide Area Network (WAN) port on the router. Connect the router power cord into an electrical outlet, then connect the other end to the router.

How do I access my 192.168 1.1 router?

Login Steps To configure the router/ change its settings or define/change password, you need to log on to the router admin. Enter 192.168.1.1 into your browser’s address bar (URL bar). If you receive an error, then 192.168.l.l is not the router’s IP address. Type it again without the help of the autocomplete.

How do I get into my router settings?

In Android, settings menus vary from phone to phone, but once you find the Wi-Fi settings:

  1. Make sure your phone is connected to your router’s Wi-Fi network.
  2. Tap on the network name.
  3. Look for a ‘gateway’, ‘router’ or other entry in the list.

How to access PLDT router admin page or settings?

How to Access PLDT Router Admin Page or Settings. For PLDT myDSL, Fibr, and Home Bro Routers. Type the default PLDT router IP address, 192.168.1.1, in the address bar of your internet browser. Enter the your router’s Username and Password in the box. For PLDT Home Bro Ultera Routers

How to get IP address for PLDT myDSL?

Select Dynamic IP (DHCP) to obtain IP Address information automatically from your ISP. The Host Name is optional but may be required by some ISPs. Use unicasting. Enter the Primary DNS server IP address assigned by your ISP. For PLDT MyDSL connections use, 124.106.5.2 and 124.106.7.2.

What happens if I Hard Reset my PLDT router?

Before you do this, please take note that doing hard reset will totally erase the settings of your PLDT WIFI router. And the hard reset is performed, your WIFI devices might lose internet access and you’ll have to enter the password again. Find the small RESET button on your router.

How to configure Zyxel P-600 with PLDT myDSL?

This guide will help you configure your zyxel router to enable its routing capabilities so you can be able to share the internet connection without using a router.