Can you use salt water in an Intex pool?
Can you use salt water in an Intex pool?
Saltwater pools were designed to be an alternative option to the standard chlorinated swimming pool. But you’re mistaken if you thought it’ll be similar to ocean water. Saltwater Intex pools use a saltwater filtration and sanitation system that converts salt into chlorine.
How much salt do I put in my saltwater Intex?
The ideal salt level in the pool water is between 2500-3500 ppm (parts per million) with 3000 ppm being optimal. A too low salt level will reduce the efficiency of the Saltwater System and result in low chlorine production.
What chemicals are needed for Intex saltwater pool?
Intex Pool Chemical Startup List
- Alkalinity increaser (sodium bicarbonate)
- Alkalinity decreaser (sodium bisulfate)
- pH increaser (sodium carbonate)
- pH decreaser (sodium bisulfate)
- Calcium hardness increaser (calcium chloride)
- Sanitizer (liquid chlorine, chlorine tablets, Intex saltwater pool system)
Can I make my inflatable pool salt water?
Yes, you can keep a pool sanitized and clean enough to safely swim in without using chemicals. It’s most common for inflatable pool owners to use a saltwater sanitizing system, or to empty and refill the pool if it’s small enough.
Can I make my above ground pool saltwater?
Simply put, steel and aluminum above ground pools are not compatible with saltwater systems. Even when such pools have protective coatings, they remain far too vulnerable to corrosion and oxidation. The only type of above ground pools compatible with saltwater sanitation systems are those made from resin.
How many bags of salt do I need for a 60000 Litre pool?
Using 20kg bags of Pool Pro Salt
| TO RAISE SALT CONCENTRATION BY | 10,000L Water | 60,000L Water |
|---|---|---|
| 0.3% or 3000ppm | 1.5 Bags | 8.6 Bags |
| 0.4% or 4000ppm | 2.0 Bags | 11.5 Bags |
| 0.5% or 5000ppm | 2.4 Bags | 14.4 Bags |
| 0.6% or 6000ppm | 3.0 Bags | 17.3 Bags |
How much salt do I add to a saltwater pool?
Setting Up a Salt Water Pool How much salt to add to the pool? To reach the initial salt level recommended by the salt system manufacturer (usually 2400-3200 ppm), you will need to add about 200 lbs of pure pool grade salt (NaCl), per 10,000 gallons of water.
Can I put salt in my inflatable pool?
Although inflatable pools don’t need to use chlorine, it’s one of the most common ways to keep pool water sanitary and safe to swim in. The alternative is a salt water system, or refilling the pool at regular intervals, which are both a lot more expensive than using chlorine.
Do you shock salt water pools?
Should you add shock to a salt water pool? It’s absolutely okay to shock your salt water pool, and is actually pretty important! Running your pool’s super-chlorinate feature too often is hard on the motor and will cause it to wear out faster.
How long after adding salt to pool Can you swim?
20 minutes
It’s recommended to wait at least 20 minutes to swim after adding salt to your pool. If you’re adding calcium chloride to your pool water, it’s recommended to wait two to four hours before swimming again.
Can I put salt in kiddie pool?
Salt. Dissolve 1/2 lb. of salt in hot water, and pour the salty solution into the kiddie pool full of water. Stir the water in the pool, and let the salt sit in the pool for 24 hours.
Is the Intex saltwater system easy to use?
The INTEX Saltwater System is an easy to use, automatic pool maintenance system. Pool owners no longer have to endure the expense and time of constant trips to the store and the dangers of handling and storing traditional packaged chlorine.
What’s the phone number for the Intex warehouse?
The Call Center phone number is 1-800-234-6839 The Intex® warehouse does not accept any returns or allow pick ups by individuals. The Intex® warehouse is a high volume commercial warehouse that is not safe for visitors. Only commercial carriers are allowed to access the facility.
Is the intexcorp store closed on Memorial Day?
Our store will be CLOSED on Monday, May 31st in observance of Memorial Day. Orders placed on Friday, May 28th will be processed on Tuesday, June 1st or after. years to come. Dura-Beam® airbeds with Fiber-Tech® Construction.