What should I know about the IBM x3650 server?

1 The x3650 server supports a maximum of 64 GB of system memory by adding an 8 GB advanced memory features DIMM in each of the eight DIMM slots (when 8 2 Microprocessor SMP upgrades must be of the same type and clock speed. 3 Use the version of ServerGuide shipped with the system, or a later version, to load software and drivers.

What is the new Lenovo System x3650 M5 rack server?

The new System x3650 M5 2U-high 2-socket rack server delivers capabilities to run a diverse set of complex workloads, 24/7, with leadership reliability, efficiency, and security.

What are the specs of the x3650 m3?

Width: With top cover – 443.6 mm (17.465 in.), With front bezel – 482.0 mm (18.976 in.) Integrated management module (IMM), which provides service processor control and monitoring functions, video controller, and (when the optional virtual media key is installed) remote keyboard, video, mouse, and remote hard disk drive capabilities

How many drive bays does Intel x3650 M5 have?

Integrated with up to two Intel® Xeon® processors E5-2600 v4 series (up to 44 cores per system), fast TruDDR4 2400MHz Memory, and massive storage capacity, the x3650 M5 fast forwards your business. You can select from an impressive array of storage configurations (up to 28 drive bays) that optimize diverse workloads from Cloud to Big Data.

How much memory does a System x3650 M4 have?

Up to 384 GB of system memory using 16 GB optional DIMMs. or up to 768 GB of memory with LRDIMM All supported system memory is addressable through direct memory access. Different types of DIMMs can not coexist in the same system.

How to change memory channel on x3650 m3?

Select this choice to view or change the server component settings. Select this choice to view or change the processor settings. Select this choice to view or change the memory settings. To configure memory mirroring, select System Settings → Memory, and then select Memory Channel Mode → Mirroring.

What are the menu choices for System x3650 m3?

Select this choice to view the system management network interface port, the IMM MAC address, the current IMM IP address, and host name; define the static IMM IP address, subnet mask, and gateway address; specify whether to use the static IP address or have DHCP assign the IMM IP address; save the network changes; and reset the IMM.