What is the difference between a T18 and T19 transmission?

T19 versions offer a 6.32:1 (IH), 5:1 or 4:1 (Ford) low gear. The T18 is synchronized in the second through fourth gears. All gears are helically cut except first and reverse, which are spur gears. T19s are fully synchronized in all gears and feature all helically cut gears.

What is a T19 transmission?

BorgWarner’s T-19 transmission is a heavy duty four speed manual transmission. Over the years, the transmission was offered in three different ratio combinations, the most favorable of which has a respectable 6.32 to 1 first gear ratio. It has a standard “H” shift pattern, with reverse to the right and down.

Is the T18 transmission any good?

The Borg-Warner T18 transmission is famous for its strength and durability in the truck and off-road world and was built for quite a few Ford trucks, IH vehicles, and Jeeps. Extremely strong, but with good highway and trail manners, it’s adaptable to essentially all of the Jeep transfer cases from ’66 to ’91.

How much oil does a T18 transmission hold?

A T18 4 speed takes 7 US pints(3 1/2 US quarts).

Is the NP435 a good transmission?

It is a well-built transmission and remains easy to locate and generally inexpensive to buy and maintain. The strength, relatively short size and the gearing of the transmission make it a good choice for a variety of situations. The NP435 was made by New Process Gear from 1962 thru 1997.

How do I identify a NP435 transmission?

Identification. This transmission is 10.8″ long and features an aluminum top cover that is retained by eight bolts. The NP435 case is of cast iron. The Ford NP435 has a 1-1/16″ diameter, ten spline input shaft that has a stick-out of 6-1/2″ from the front face of the transmission.

What is the strongest manual transmission?

The Tremec TKO 5-speed is the transmission that started a revolution in manual overdrive conversions. It is one of the most versatile 5-speed transmissions in the market today, as well as one of the strongest. With an impressive 600 lbs./ft.

How much does it cost to rebuild a NP435?

the np435 is the most common 4spd ever put into a truck. rebuild kits are usually about $200, but its not worth it because like that other guy said – you could have a broken gear or a damaged shaft.

How much does a T90 transmission weigh?

How much does a t90 transmission weigh? Thanks! A: The shipping weight is 64 pounds.

Is the T19 transmission the same as the T18?

T19: This transmission looks identical to the Ford T18, and the case length is the same. The 1st gear ratio is 5.11:1 1st; 2nd 3.03:1; 3rd 1.79:1, and 1:1 4th gear ratio. These transmissions were used in Ford pickups 1974-88. The first gear on this transmission is synchronized, which is the biggest advantage over the T18.

What’s the transmission ratio on a Borg Warner T-19?

Borg Warner T-19 Transmission The Ford T-19 is similar to the T-18 except first gear is synchronized. First gear on Ford versions of the T-19 is always the close ratio, around 4:1.

What kind of first gear does a Ford T19 have?

11 versions are reported also for these. The 460 4wd truck got the 6.32:1 first gear, purportedly from 1983 to 1986 F250’s. The T19 transmissions are equipped with dual PTO ports. An individual may find the cast numbers of 13-09-065-911 or 13-09-065-905 in Ford T19’s.

What kind of transmission does a Ford pickup have?

It’s replacement, the T-19, was used in ’74-’88 Ford pickups and some IH trucks and is identical in appearance except has a 5.11:1 first gear ratio which is synchronized. The T18 & T19 has a 1-1/16″ diameter, ten-spline input shaft that has a stickout of 6-1/2″ from the front face of the transmission.