What is offset section view?

An offset section view is generated by offsetting (bending) the cutting plane to show features that are not in a straight line. Use object snaps, object snap tracking, ortho and polar tracking to specify the location of the section line precisely.

How do you do a section view in CATIA?

Creating a Section View

1. Click the Drawing window, and click the Offset Section View icon. from the Views toolbar (Sections subtoolbar).
2. Select the holes and points required for sketching the callout on the view.
3. Double-click to end the cutting profile creation.

How do I cut a section in CATIA?

Creating 3D Section Cuts

1. Select Insert > Sectioning from the menu bar, or click Sectioning in the DMU Space Analysis toolbar and create a section plane.
2. In the Definition tab, click Volume Cut to obtain a section cut:

How do you draw a half section view?

To Create a Half Section View

1. Click Layout tab Create View panel Section drop-down Half.
2. Click the view you want to use as the parent view.
3. Click in the drawing area to indicate the start point of the section line.
4. Click in the drawing area to indicate end point of the first segment of the section line.

What are the 7 section views?

There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.

What is full section view?

This is the most common section (called a full section) with the imaginary laser cutting a line across the entire construction, offering a view of a portion of the building with the rest of it put to one side. Half sections or views. In this type of section, only half of the space or object is cut away.

How do you move a section view in Catia?

Go to Tools > Options > Mechanical Design > Drafting > General tab and in the View axis area, clear the Display in the current view check box. Right-click the view that you want to re-position, the unfolded view for example. A contextual menu is displayed. Select View Positioning > Align Views Using Elements .

How do I cut parts in Catia v5?

Cutting the Part by the Sketch Plane

1. Double-click Sketch. 2 from the geometry.
2. Move the sketch so that you can see the whole part.
3. Click Cut Part by Sketch Plane from the Visualization toolbar.

What is master section?

Master sections are the guides for design requirements which decide the component packaging after technical (Styling, Concept or Class-A) surfaces.

What are the six section views?

6 Types of sectional views

• Full sections.
• Half sections or views.
• Offset sections or views.
• Broken out sections or broken views.
• Revolving sections or view.
• Removed sections.

What is section view explain with examples?

A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that can not be clearly described by hidden lines in exterior views. By taking an imaginary cut through the object and removing a portion, the inside features may be seen more clearly.

Where can I find the sectioning command in CATIA V5?

Sectioning command ( Figure 1) it is available in Assembly Module of CATIA V5 and works for at least one part (with other words, if you want to make a section for one part, you can insert this part in a product to make some sections). This command it is available in Space Analysis Toolbar.

How to use an offset constraint in CATIA V5?

Offset Constraint in CATIA V5-Procedure: 1 Select a plane (say XY Plane). 2 Draw a circle with the given dimensions. 3 Now, go to Insert-Operation-Transformation-Offset. 4 Click on the circle and move the cursor to some distance to provide the necessary amount of Offset from the original circle and this process continues.

What do you need to know about CATIA V5?

•Part Design: Design parts using a solid modeling approach •Sketcher: Create 2D profiles with associated constraints, which is then used to create other 3D geometry. •Assembly Design: Assemble parts together with constraints •Drafting: Create drawings from parts or assemblies •Generative Shape Design: Design parts

What does the last tab in Catia do?

The last tab, Behavior, help us to freeze a Section, or to select if you want to change something in it, to be automated updated the section or to be updated manually. This option it is very useful when you work with large assemblies that can crash you CATIA app if you use the Automatic Update feature.