What is a 49 service error on an hp printer?

A 49 error typically occurs when the printer attempts to perform an action that the firmware is not capable of performing or might not be designed to handle, for example: Printing files that include unsupported printer commands.

How do I reset my HP Laserjet m2727nf?

On the product control panel, press Setup. Use the arrows buttons to select Service, and then press OK. Use the arrows buttons to select Restore defaults, and then press OK. The product automatically restarts.

How do I reset my HP Laserjet MFP?

To restore the product to the factory-default settings, follow these steps.

1. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect.
2. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on.
3. Release the Resume button.

What to do if LaserJet m2727 MFP error code?

Description: The product has experienced an error in the scanner sub-assembly area. Remedy: Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it.

What is the error 49 on a HP printer?

Example – homepage for this printer: The Document HP LaserJet Pro and Color LaserJet Pro Printer and MFP – Troubleshooting 49.XXXX Errors Particularly if the solution for this thread is not the solution for your issue, Consider starting a new thread of your won.

Why are there 49 errors on my MFP printer?

49 errors may be displayed when the MFP (multi-function printer) or single function printer attempts to perform an action that the device firmware is not capable of and may not have been designed to handle. Printing or scanning files that include unsupported printer commands. A unique combination of environment and interactions with the device.

Why is my HP LaserJet pro not working?

HP LaserJet Pro and Color LaserJet Pro Printer and MFP – Troubleshooting 49.XXXX Errors. Issue. 49 errors may be displayed when the MFP (multi-function printer) or single function printer attempts to perform an action that the device firmware is not capable of and may not have been designed to handle.