What does setback distance mean?

It is the distance measured in feet between a house or structure from the front, side, and rear. Maintaining the setback line allows easy access to underground utilities.

Why setback distance is provided?

Setback distance m or the clearance distance is the distance required from the centerline of a horizontal curve to an obstruction on the inner side of the curve to provide adequate sight distance at a horizontal curve.

How do you calculate the length of a transition curve?

The length of the transition curve should be determined as the maximum of the following three criteria: rate of change of centrifugal acceleration, rate of change of super-elevation, and an empirical formula given by IRC. According to IRC, C = 80/(75+V) and C should be (0.5

What is meant by sight distance?

Sight distance is the length of road visible ahead to the driver at any instance. Driver travelling at the design speed has sufficient sight distance or road length visible to stop vehicle, in case of any obstruction on the road ahead, without collision.

What is control line and building line?

Building Line:- “Building line” means a line on either side of any highway or part of a highway fixed in respect of such highway. Control Line:-“control line” means a line on either side of a highway or part of a highway beyond the building line fixed in respect of such highway.

What is a setback rule?

Each city has specific rules about how far a property must be located from the street or adjacent properties to the side and rear. These distances are known as setbacks, says Legal Match. Local governments use setbacks to create “no-building” zones on your property and keep traffic or certain harmful uses at bay.

What is an example of a setback?

The definition of a setback is an interruption in progress. An example of a setback is someone having a large, unexpected expense while in escrow on a house for which they have to find additional funds.

What is road margin?

What are road margins? The portion of the road beyond the carriageway and on the roadway can be generally called road margins. Different elements of road margins are shoulder, parking lanes, bus bays, cycle track, footpath and guard rails.

What is safe sight distance?

The sight distance needed by the driver of a vehicle who see another vehicles approaching the intersection, reacts and applies brakes to bring his vehicle to dead stop at the intersection without any collision or accident is called safe sight distance for entering into an intersection or lateral sight distance.

What is the formula of superelevation?

Superelevation Formula The rate of change in superelevation is found by dividing the difference between normal crown and full super by the transition length. 11000 – 10971.61 = 28.39. The rate of change is the same as for the transition at the beginning end of the curve.

What is the transition length?

Transition length is the distance that is required to transition the road from normal to full superelevation. It consists of Runout Length and Runoff Length. Runout Length is the distance that is required to transition from normal crown to zero superelevation (flat).

Which is the best definition of a setback?

Setback. A distance from a curb, property line, or structure within which building is prohibited. Setbacks are building restrictions imposed on property owners. Local governments create setbacks through ordinances and Building Codes, usually for reasons of public policy such as safety, privacy, and environmental protection.

How to calculate the outside setback of a bend?

Outside Setback (OSSB) OSSB = [Tangent (Degree of bend angle / 2)] × (Inside bend radius + Material thickness) The outside setback is a dimensional value that begins at the tangent of the radius and the flat of the leg, measuring to the apex of the bend (see Figure 2).

How is the height of a side setback measured?

Side setbacks are evaluated by the width of the lot, measured at the building line and by the height of the building. At the time of calculation, the height of the building is taken at the closest point to the boundary and not the overall height of the building.

How is the outside setback related to the inside setback?

When the sheet metal is bent the inside radius pulls the edge of the material away from the apex of the bend. Because this is a geometrical function it does not change with a metal’s K-Factor the way Bend Allowance and Bend Deduction do. The Outside Setback is closely related to, but should not be confused with, the Inside Setback.

https://www.youtube.com/watch?v=Dl_mX9J-COE