What do you put in the bottom of a stone fire pit?

What do you put in the bottom of a fire pit? You’ll want to start with a layer of sand at the bottom of the pit, and then top the sand with gravel, lava rocks, fire pit glass, paving stones or even bricks for your fire pit. Alternatively, you can simply use dirt.

How deep should a stone fire pit be?

How Deep Do Fire Pits Need To Be? For in-ground fire pits, it’s generally recommended that you dig down 6 to 12 inches. Make sure the ground is as level as possible before adding in your layer of lava rocks or fire pit glass.

How do you build a simple fire pit in your backyard?

Instructions

1. OUTLINE YOUR FIRE PIT. Lay out the bottom ring of your stones in the grass where you want the fire pit to be.
2. DIG YOUR FIRE PIT. Use a shovel, mattock, or whatever other digging tool you need to dig out your circle 6” deep.
3. FILL YOUR FIRE PIT.
4. BUILD YOUR FIRE PIT.

What should I put around my fire pit?

Cover the landscape fabric or plastic with a non-flammable material of your choice, such as river rocks, gravel, brick or stone pavers. If you use stone pavers, spread silica sand on top of them, and use a broom to push the sand into the cracks between the pavers to help hold the pavers securely in place.

Should I put sand in my fire pit?

The main benefits of using sand are that it helps to soak up the heat and evenly distribute the heat throughout the fire pit. Sand is also great for protecting the actual metal bowl from the intense heat the fire can put out. If you are an avid gardener, you may also prefer to not use sand.

Can I just dig a hole for a fire pit?

For instance, if you just want a basic fire pit, dig about 6 to 8 inches down and call it good. You can go deeper if you want, but keep in mind that you don’t want the hole so deep you can’t enjoy watching the fire. These roots can, and do, re-ignite and turn into fires.

Can you use concrete blocks for fire pit?

You can build a cinder block fire pit directly on the ground. You don’t want to use a compressed concrete block that’s too dense in a fire pit. It must be porous enough to vent any steam that forms inside as trapped water turns to steam. If blocks aren’t porous, they could explode as steam builds.

What is the best way to build a fire pit?

To build a brick fire pit, you will only need a few easy to find supplies: A pile of large bricks or cinderblocks – It is best to use larger, wider bricks when you build a brick fire pit so that the walls of your fire pit are sturdy. A large round piece of sheet metal or other non-flammable material – This is optional.

How do you make your own fire pit?

Make the hole round by hammering a stake into the center of your fire pit area. Loop a 3 1/2-inch length of string over the stake and mark the circle. Dig out 12 inches of soil. Shovel in 4 inches of gravel and 4 inches of sand. Tamp that layer flat. Onto that base, lay down the base course of blocks.

What kind of stone should I use in my fire pit?

Hard rocks like granite, marble, or slate are much denser, and therefore less likely to absorb water and explode when exposed to heat. Other rocks that are safe to use around and in your fire pit include fire-rate brick, lava glass, lava rocks, and poured concrete. This is one area where you can use lava rocks for fire pit safety.

Are fire bricks necessary when building a fire pit?

Brick is a highly durable material, making it a great choice for building a fire pit. It traps in the heat of the fire but also helps keep it burning, so it ensures that you’ll have a safe yet long-burning fire.