What do I do if my Acer laptop says no bootable device?

Use the following steps to resolve this situation:

1. Hold the power-button for 5 seconds to power off the device.
2. Power on the system. As soon as the first logo screen appears, immediately press the F2 key, or the DEL key if you have a desktop, to enter the BIOS.
3. Press F9 and then ENTER to load the default configuration.

Why My laptop is showing no bootable device?

A “No bootable device” error may occur when the primary partition of your hard drive is inactive due to some mistake in your computer. You should set it back as active to fix the issue.

How do I boot my Acer Aspire e1 from USB?

Under the BOOT menu, select Legacy boot and press F10 Save & Exit. While the notebook is rebooting, press F2 again to enter the BIOS. Under the BOOT menu, select as your first boot option the USB HDD stick (your USB stick). Press F10 Save & Exit.

How do I fix my Acer Aspire not booting?

Fix 1: Power reset your laptop

1. Turn off your laptop.
2. Remove the AC adapter cable, hard drives, the battery and any other attached peripheral devices.
3. Press and hold the Power button for 30 seconds and release.
4. Put your battery back in and plug the charger.
5. Press the Power button as normal to turn on your laptop.

How to fix no bootable device on Acer Aspire?

If you are getting the error “No Bootable device found”after updating Acer bios from 1.00 to 1.05 then follow these steps : Forced shutdown your system by pressing the power key for little longer. Now restart your laptop/desktop. Press F2 key repeatedly and go to BIOS setup. Now go into main and F12 Boot Menu: Enable.

Is there a legacy option on Acer Aspire e1-410?

No legacy option in F2 setting. Just UEFI. Acer Aspire E1-410 — Acer Community No legacy option in F2 setting. Just UEFI. Acer Aspire E1-410 I accidently erased the Linux OS in my Acer Aspire E1-410 laptop. Now i no any boot device can be detected. THe laptop cant even detect DVD boot and USB boot.

What to do if there is no bootable device?

Press and hold F2, then power on laptop. keep holding F2 until the UEFI screen (aka BIOS) pops up. use arrow keys to navigate to the BOOT tab. Press on BOOT MODE. Change to LEGACY. (A pop up warning should appear. This is normal. just hit OK). Note that the SECURE BOOT option is no longer there!

How to boot Windows 7 on Acer Acer?

In a Windows 7 installation media, in “System Recovery Options”, select the first item and Windows 7 as the operating system, click “Next” and then “Command Prompt”. 4. In Command Prompt, type the following command and hit Enter.