How do I set the time on my Polycom IP 7000?

Resolution

1. Press the Menu/Home button.
2. Select Settings.
3. Select Advanced.
4. Enter phone password, then press Enter.
5. Select Admin Settings.
6. Select Network Configuration.
7. Scroll down to SNTP and ensure address is set to pool.ntp.org. Press OK if the time server had to set.
8. Scroll down to GMT Offset.

How do you sync the time on a Polycom phone?

How to Set or Change Date & Time on Polycom Phone

1. Press Menu/Home button.
2. Select Settings, and then go to Advanced.
3. Select Admin Settings.
4. Enter the phone’s admin password.
5. Select Network Configuration.
6. Highlight SNTP Address then press Select.

How do I access my Polycom web interface?

How do I login to the web interface of a Polycom phone?

1. Power on the phone.
2. Confirm that the PC and phone are on the network.
3. Enter phone’s IP address into your supported web browser.
4. For Username, enter: Polycom.
5. For Password, enter: 456.

What is the default password for Polycom phones?

456
The default password (456 / 72227 / blank) for accessing the advanced settings or the web interface of third-party Polycom phones is not being accepted.

How do I change the date and Time on my IP phone?

Navigate to Date/Time and press the Select softkey. Step 4. Navigate to Time format and press the right arrow on the Navigation cluster button to select either the 12hr or 24hr format.

How do I reset my soundstation IP 7000?

Hello Spa, During the 6 or 7 second countdown you simply need to press 1,3,5 and 7 and nothing else and all at the same time. This will prompt you for the password and will reboot.

How do I update my Polycom IP 331 firmware?

How To Update Polycom Device Firmware

1. From the phone’s local menu interface, press Menu > Settings > Advanced (default password: 456) > Administration Settings > Network Configuration > Server Menu.
2. Set Server Type to HTTP by scrolling left arrow key, press OK.

How do I find my NTP server IP address?

Type “Net Time /querysntp” into the command prompt and press the “Enter” key. This displays your NTP server settings. The name of the server is shown, but you can now use the “ping” command to retrieve the IP address.

How do I connect to NTP server?

Enable NTP

1. Select the Use NTP to synchronize the system time check box.
2. To remove a server, select the server entry in the NTP Server Names/IPs list and click Remove.
3. To add an NTP server, type the IP address or host name of the NTP server you want to use in the text box and click Add.
4. Click OK.

How to setup Polycom SoundStation IP 7000 phone?

Setup Guide for the Polycom SoundStation IP 7000 Phone 1 – 4 The following figure shows how to connect your phone to the network using a PoE source and the 7.6m (25ft) Network Cable. To connect your phone using a PoE source: 1. Connect the 7.6m (25ft) Network Cable to the LAN jack on your phone. 2.

How to set date and time on Polycom phone?

The date and time on the phone can be set by synchronizing it with an NTP server (Network Time Protocol server). This can be done by logging into your Polycom phone through a web browser. Log into the IP address of the phone: http://192.168.0.102 for example. SNTP Server: pool.ntp.org Choose “Submit” to submit your settings and reboot the phone.

Is the SoundStation IP 7000 conference phone compatible?

The SoundStation IP 7000 conference phone is compatible with the following Polycom HDX systems: •Polycom HDX™ 4000 series •Polycom HDX™ 6000 HD •Polycom HDX™ 7000 series •Polycom HDX™ 8000 HD •Polycom HDX™ 9000 series The topics in this chapter include: •Before You Begin on page 2 •Connecting the Phone to the Network on page 5

How do I Reboot my Polycom cell phone?

This can be done by logging into your Polycom phone through a web browser. Log into the IP address of the phone: http://192.168.0.102 for example. SNTP Server: pool.ntp.org Choose “Submit” to submit your settings and reboot the phone.