How do I log into my NetComm modem?

1. Open a web browser and type http://192.168.20.1/ into the address bar at the top of the window. 2. At the login screen, type admin in the username and password field, then click the Login button.

How do I setup my NetComm modem?

NetComm NF10WV modem guide – nbn™ FTTN/FTTB

1. step 1 – connect to your modem via Wi-Fi or Ethernet.
2. step 2 – log into your modem.
3. step 3 – enter the MATE settings into your modem.
4. step 4 – plug your modem into your telephone wall socket.

What is the default modem IP?

1.1 is the common IP address that is used by many modems and routers nowadays. It’s a default IP address where you can access your modem or wireless router to change settings, change the WiFi name or password. Sometimes, your modem or router may use a different IP address, such as 192.168.

How do I reset my Netcomm modem?

Method 1: Reset button

1. While the modem is running, find the ‘RESET’ button on the back of your modem.
2. Use a small pin or paperclip to press and hold the ‘RESET’ button for 5-10 seconds.
3. Release the button and your modem will begin to restart (this could take 5 minutes to complete).

How do I reset my Netcomm router password?

ADSL: How To Change A Wi-Fi Password On A Netcomm Modem

1. Open up an internet page and in the web address bar type in: 192.168.20.1.
2. Login using admin for Username/Password.
3. Select Wireless, then click on Security.
4. Type in your preferred password (min.
5. Press apply/save and test your password.

How do I access my Netcomm router settings?

Netcomm Router Configuration

1. Visit the router’s IP address in a new browser window. http://192.168.1.1 is the default Netcomm router IP address.
2. Enter the Network password. The “Enter Network Password” window will appear.
3. Navigate to the Internet Tab.
4. Configure Your DNS Settings.
5. Reset/Reboot the Router.
6. Cache Flushing.

Why is my Netcomm Wireless not working?

If the wireless is still not working then it could be a problem with the wireless specifically. The best way to test this is to plug an Ethernet cable from one of the yellow LAN ports on the Netcomm router to your computer and see if you have an internet connection.

Which WIFI IP address is best?

Some of the most trustworthy, high-performance DNS public resolvers and their IPv4 DNS addresses include:

• Cisco OpenDNS: 208.67. 222.222 and 208.67. 220.220;
• Cloudflare 1.1. 1.1: 1.1. 1.1 and 1.0. 0.1;
• Google Public DNS: 8.8. 8.8 and 8.8. 4.4; and.
• Quad9: 9.9. 9.9 and 149.112. 112.112.

Do I need a modem and router to get Internet?

Most of the time, people will need both a modem and a router to get their homes online. However, there are some cases where you don’t need one or the other. Remember when we said that people are typically connected to their ISP via copper cables or phone lines?

Do you need a modem to connect a wireless router?

Standard routers do not have wireless technology built in, so if you want a wireless network, you’ll require a wireless router. While a wireless router can direct local traffic on a network, a modem is required if Internet access is desired.

What is my modems IP?

Click the Windows Start button , type “cmd” in the Search box and press “Enter” to open the Command Prompt. 2. Type “ipconfig /all” in the Command Prompt and press “Enter” to run the command. 3. Locate the “Default Gateway” line. The IP listed on the Default Gateway line is the IP address of your modem.