How do I know my nock size?

Generally, proper nock fit is determined as follows- the arrow should be able to hang from the string in a vertical position without falling off under its own weight, but should separate from the string with a light tap on the string within 5-6 cm of the nock.

Do all nocks fit all arrows?

Naturally, all arrow manufacturers make nocks to fit their arrows. Aftermarket press-fit nocks bear the common sizes G, F, X, A, H, S and GT. G and F nocks fit shafts with a . 166-inch inside diameter.

What arrows use H nocks?

The Easton H Nock is precision-molded to be a perfect press-fit replacement nocks for Easton ST Epic, ST Excel, ION, Bloodline, and Wildthing carbon arrows. They are also replacement nocks for our Traditional Only® 600 spine.

Why are lighted nocks illegal?

Ironically, the state allows the use of lighted scope reticles on rifles, but lighted nocks remain illegal for archery hunters. Rather than providing any kind of unfair advantage to hunters, lighted nocks allow hunters to better gauge shot placement on animals.

How tight should arrow nocks be?

There is a fine line (only a few thousandths of an inch) between the two. Ultimately, what you want is an arrow that clicks onto the string tight enough that it won’t fall off yet loose enough to spin freely during the shot cycle.

Should you glue your nocks in arrows?

No glue is required with pressfit nocks. You just stick them in, and pull them out, as needed. With pressfit nocks, it’s critical to know what shaft you’re shooting, since not all shafts have the same inside diameter. Naturally, all arrow manufacturers make nocks to fit their arrows.

Are lighted nocks legal?

Illuminated nocks are legal. Any electronic device attached to the bow or arrow is illegal. (Exception of lighted nocks)

Will lighted nocks affect arrow flight?

As we’ve mentioned, lighted nocks do not affect the flight path of the arrow whatsoever, and so they also do not affect accuracy in any way. They work the same way any other normal or traditional nock does, helping fit the arrow onto the bow when it is being shot.

How do you know if you have a pinched Nock?

To make sure you do not have excessive nock pinch, do this simple test: remove the tip from your arrow and pull your bow back to full draw. If your arrow does not stay seated perfectly on your rest, then you definitely have excessive nock pinch.

What glue do you use for arrow inserts?

Insert Weld Arrow Insert Glue is a Quick Bonding Rubber Toughened Agent Great for all Arrow Inserts. The Shock Resistant formula of Insert Weld has an . 008″ Gap Filler to correctly fill any insert to shaft voids.

Which is the best Arrow nocks to buy?

Choose from the world’s largest selection of Arrow Nocks at Lancaster Archery Supply. Choose from Beiter Nocks, Pin Nocks, Out Nocks, Easton Nocks, Gold Tip Nocks, Bohning Nocks, Carbon Express Nocks, Lumenok and Nockturnal Lighted Nocks, Carbon Arrow Nocks and more.

How big of an arrow shaft do you need for a nock?

H and H.E. nocks fit shafts with a .234-inch inside diameter. S nocks ‑ also called Super Nocks ‑ fit shafts with a .244-inch inside diameter. GT nocks fit shafts with a .246-inch inside diameter.

What do lighted nocks do for bowhunters?

The lighted nocks help bowhunters recover game and/or their arrows in poor light. Pin nocks are tiny nocks that fit onto an aluminum pin that’s installed into the nock end of the shaft. The pin bushings are meant to protect shafts from being damaged by other arrows.

What kind of arrows do you use with overnocks?

The nock fits over top of the shaft. Overnocks are most commonly used with carbon arrows and they come in nearly two dozen sizes to fit a host of shafts. They’re also used with shafts made of other materials. Easton’s X10 Overnock, for example, can be used with the company’s X10 aluminum/carbon shafts.