Users' questions

How do I fix printer unable to print 4f?

by Rhyley Bryan

How do I fix printer unable to print 4f?

Follow these steps:

  1. Remove all ink cartridges from the printer and gently clean the contacts on the printer and cartridges.
  2. Unplug your printer and leave for 10 – 20 minutes.
  3. Plug the printer back in and wait for the message to insert new cartridges.

Why is my printer not printing correctly Brother?

The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver.

How do I fix Error 48 on Brother printer?

Troubleshooting Print Head problem

  1. Plug out the printer power cord.
  2. Lift the scanner cover gently.
  3. Look inside the printer. If there is any paper part jammed, remove it.
  4. Do check for any scrap beneath the printer head.
  5. Move the printer head to the center if it is hung in the right or left corner.

How do I fix a Brother printer error?

Simple Brother printer fix

  1. Click Start > Control Panel > Control Panel Home (on the left) > System & Maintenance (on the top).
  2. Scroll down and click Administrative Tools.
  3. Double-click on Services > scroll down to Print Spooler > right-click Print Spooler > restart.

What is af in Brother printer?

The message ‘Scan Unable AF’ or ‘Machine Error AF’ will appear on the display if there is a mechanical malfunction of the Brother machine or if there is paper jammed in between fuser rollers. To reset the machine, power the machine off using the power switch located on the right side of the machine.

What to do if Brother printer is printing blank pages?

Windows Users

  1. Open the Printers folder.
  2. Access the Printer’s properties:
  3. Click on the Advanced Tab.
  4. Click the PRINT PROCESSOR button.
  5. Under Print Processor, select WINPRINT.
  6. Under Default Data type, make sure RAW is selected and click OK.
  7. Under the Advanced Tab, uncheck ‘Keep printed documents’ if it is checked.

What is the meaning of print unable 48?

The message “Unable to Print 48” will appear on the display for one of the following reasons: i. A foreign object, such as a paper clip or ripped piece of paper, is stuck in the machine; ii. Using both hands, use the finger holds on each side of the machine to life the scanner cover into the open position.

How do I fix init unable 48?

“Unable to Init. 48”

  1. Confirm the error message appearing on the display.
  2. Press Stop/Exit to temporarily clear the error message.
  3. Unplug the machine from the power outlet.
  4. Print a User Settings Report to test.
  5. Your machine will require service.
  6. Transferring stored faxes to another machine.

How do you reset a Brother printer?

[Settings]>[All Settings]>[Initial Setup]>[Reset]. to display the type of reset functions, and then press the reset function you want to use. The LCD displays [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.].

How do I fix unable AF scan?

The message ‘Scan Unable AF’ or ‘Machine Error AF’ will appear on the display if there is a mechanical malfunction of the Brother machine or if there is paper jammed in between fuser rollers. 1. To reset the machine, power the machine off using the power switch located on the right side of the machine.

Why does my printer say unable to print 4F?

The message “Unable to Print 4F” will appear on the display for one of the following reasons: i. A foreign object, such as a paper clip or ripped piece of paper, is stuck in the machine; ii. Mechanical malfunction. To attempt to clear the error, continue to step 1. 1.

What does Brother Brother printer error 4F mean?

This error affects most of the Brother inkjet printer range, and unlike Error 46, this one is a lot more difficult to fix, but I’m going to list as many tips as possible and hopefully you will be up and running again with a small amount of effort! What does Brother Printer error 4F mean?

What is the error code on my Brother printer?

Repair and troubleshooting for the Brother Industries multi-function printer with model number MFC-J430W. My printer (actually Brother MFC-J630W) gives me an error code: Unable to Init. 4F and/or Unable to Print 4F.

What to do if your computer is unable to init 4F?

– If “Unable to Init. 4F” is still on the display, go to step 11. – If “Unable to Init. 4F” has cleared, go to step 12. 11. Unplug the machine from the power outlet for approximately one-minute, then plug it back in. – If “Unable to Init. 4F” still on the display, go to step 13. – If “Unable to Init. 4F” has cleared, go to step 12.