How do I connect my Linksys WRT120N?

To access the browser-based utility, launch the web browser on your computer, and enter the Router’s default IP address, 192.168. 1.1, in the Address field. Then press Enter. A login screen will appear.

How do I setup my Cisco WRT120N router?

How to Manually Set a Linksys WRT120N Wireless Router (13 Steps)

1. Disconnect the modem from its power source, and then connect one end of an Ethernet cable to the “Internet” port on the back of the router.
2. Connect the other end of the cable to the “Ethernet” or “1000BASE-T” port on the rear of the modem.

How do I reset my Linksys WRT120N?

Hard reset instructions for Linksys WRT120N

1. Open your browser and navigate to the router interface (check default settings below)
2. Under the Administration tab you will find a sub-tab called Factory defaults.
3. On the Factory defaults page click the button labeled Restore Factory Defaults.

What is Linksys router default password?

admin
The router’s default Password is “admin”, as for the User name, you can leave the field blank. For security purposes, it is recommended to change the default password. QUICK TIP: Changing the router’s password through the web-based setup page may prevent you from using the Linksys Connect software.

How do I setup my Linksys router?

Network cable (for some models).

1. 1 Connect Power. Please ensure that you are using the power adapter that came with your router.
2. 2 Connect to Modem by Cable/Wire.
3. 3 Login.
4. 4 Select Password.
5. 5 Change SSID and Password.
6. 6 Keep Password Secure.
7. 7 Deciding to Update.

How do I access my WRT120N router?

The default IP address for the WRT120N router is 192.168. 1.1. You can enter the IP address as a URL in a web browser to open the router settings. You can find the default gateway IP address of any device in the Windows network settings.

How do I change the password on my Linksys WRT120N router?

How to Reset the WRT120N Password

1. Turn the router around so you can see the plugged-in cables and the red Reset button.
2. Use a paperclip or pin to press the Reset button for approximately 5 seconds.
3. Remove the power cable from the back of the WRT120N for a few seconds, then plug it back in.

Is admin password the same as Wi-Fi password?

The router or admin password is used to log in to the router’s web-based setup page for configuration or verification purposes while the wireless password is used to connect wireless devices to your wireless home network or hotspot.

How do you set a password for your Linksys router?

Follow the steps below to change your Wi-Fi password:

1. Launch a web browser, enter “192.168. 1.1” in the Address bar then press [Enter].
2. Enter your credentials in the fields provided.
3. Click the Wireless tab, then click the Wireless Security sub-tab.
4. In the Passphrase field, enter your preferred Wi-Fi password.
5. Click.

Why is my Linksys password not working?

If the log-in window doesn’t accept your password, you have to reset it to factory defaults. Resetting the router will erase its current settings. Step 1: Press and hold the reset button of your router for 30 seconds.

What is the password for the Linksys wrt120n router?

He’s also the GM & VP of Lifewire. Like most Linksys routers, the Linksys WRT120N default password is admin. Although some routers require a default username that must be entered along with the password, the WRT120N username field can be left blank; only the password is required.

Which is the default IP address for wrt120n?

What is the default IP address, username, and password used to log in to the web-based setup page of the WRT120N? The default IP address to access the web-based setup page is 192.168.1.1. To log in, the Username field is left blank and “admin” is the default password to be used.

What is the default password for a Linksys router?

Like most Linksys routers, the Linksys WRT120N default password is admin. Although some routers require a default username that must be entered along with the password, the WRT120N username field can be left blank; only the password is required. Information in this article applies specifically to the Linksys WRT120N router.

How do I Reset my router default password?

Press and hold the Reset button for approximately 10 seconds, and release it. or 2. Log in to Web Interface, Go to Administration ->Factory Defaults- >Restore All Settings and reset.