How can I use Microsoft HyperTerminal to send AT commands to a mobile phone?
How can I use Microsoft HyperTerminal to send AT commands to a mobile phone?
Microsoft HyperTerminal is a small program that comes with Microsoft Windows. You can use it to send AT commands to your mobile phone or GSM/GPRS modem. It can be found at Start -> Programs -> Accessories -> Communications -> HyperTerminal.
How can I receive SMS using CMD?
Line 5-9: The AT command +CMGL is used to list all SMS text messages in the message storage of the GSM / GPRS modem….11.1. The 1st Way: Using a Computer to Receive SMS Messages through a Mobile Phone or GSM/GPRS Modem.
| AT command | Meaning |
|---|---|
| +CMGL | List messages |
| +CMGR | Read messages |
| +CNMA | New message acknowledgement |
What are the AT commands which is used for sending or receiving SMS?
Line 3: The AT command +CMGF is used to instruct the GSM / GPRS modem to operate in SMS text mode….10.1. The 1st Way: Sending SMS Messages from a Computer Using a Mobile Phone or GSM/GPRS Modem.
| AT command | Meaning |
|---|---|
| +CMGS | Send message |
| +CMSS | Send message from storage |
How can I send SMS from router?
- Visit http://tplinkmodem.net, and log in with the password you set for the router.
- Go to Advanced > SMS > New Message page.
- Enter the receiver’s phone number in the Phone Number field.
- Enter your message in the Message field. Tips:
- Click Send to send the message or click Save to save the message to the Drafts.
How to use Microsoft HyperTerminal to send at commands?
Go to Control Panel -> Modem. Then click the Diagnostics tab. In the list box, you can see which COM port the mobile phone or GSM/GPRS modem is connected to. Go to Control Panel -> Phone and Modem Options. Then click the Modems tab. In the list box, you can see which COM port the mobile phone or GSM/GPRS modem is connected to.) Figure 6.
How to send and receive SMS using AT commands?
This mode allows you to send and receive SMS messages using AT commands, without the need to decode the binairy PDU field of the SMS first. This is done by the GSM modem. To send the commands discussed in this tutorial, you can use a terminal program, for instance Hyperterminal.
When to use MS HyperTerminal to test GSM devices?
The MS HyperTerminal is a handy tool when it comes to testing your GSM devices. It is a good idea to test your GSM devices beforehand. When a problem occurs, sometimes it is difficult to tell what causes the problem. The cause can be your program, the GSM device or the SIM card.
How can I send a text message using a modem?
In order to send a SMS, the modem has to be put in SMS text mode first using the following command: If the modem responds with error, either the modem does not support SMS text mode, or the SIM card is not ready. In this case please check that the SIM card is inserted and the pincode is entered.