Did Pontiac make a 301 engine?

The Pontiac 301 Turbo is an engine that Pontiac produced for the 1980 and 1981 Trans Am. It was only available for two years, in the 1980 & 1981 model year, which were also the last two years of this body style of the Trans Am, before it was succeeded by the all-new third-generation F-body in 1982.

Is a Pontiac 301 a big block?

The 301 Turbo was unique in that it had a beefier block than the 1977–79 versions (which carried on in the non turbo versions in 1980 and 1981), a very mild camshaft with 0.35 in (8.9 mm) lift and 250 degrees gross duration, a 60 psi (4.1 bar) oil pump to ensure adequate oil to the oil-cooled Garrett TBO-305 …

What was the most powerful Pontiac engine?

The most powerful version of Pontiac’s 400 to ever reach production was the Ram Air IV. With its improved cylinder heads and their round exhaust ports, they’re easy to spot.

Was the 389 a big block?

Only difference is the bore and stroke of the engine. There is no Pontiac big block or small block. they have the same physical demensions.

Is the Pontiac 326 a good motor?

While the 326 was not a “muscle car” engine, it was a good, solid piece that had all the reliability and engineering that those muscle car engines had.

Is the Pontiac 455 a good engine?

Despite only two years in production run, the 455 H.O. is regarded by many Poncho experts as the most versatile street engine Pontiac ever produced. Gobs of low-rpm torque make it quite responsive in normal driving conditions, and it can instantly turn tires into a smoky haze by standing on the throttle.

Is a Pontiac 389 a good engine?

They were responsive and flexible, building enough torque to move a 3,600-pound Goat around with authority, yet they could be docile enough for trips to the grocery store. It was an ideal situation for street-performance enthusiasts because in the relatively light GTO body, the 389 engine really shined.

Is a Pontiac 455 a good engine?

Is a Pontiac 400 a small or big block?

Registered. pontiac v8s 326 to 455 are the same size blocks. the bore and stroke is changed to achive the differant CID. So there are technically no small and big blocks.

How much horsepower does a Pontiac 400 engine have?

360 horsepower
They found that the engine provided massive amounts of low-end torque and rock steady high RPM power output. The 389 posted numbers in the 330 horsepower range with a single spread-bore, four-barrel carburetor. The 400 pushed this number up to 360 horsepower, with the same Quadrajet single four-barrel.

What kind of engine does a Pontiac 301 have?

You can save all the brackets, accessories and tin for when you get a real motor. To haul the Wildcat with a Pontiac engine economically, find a two-barrel 350 or 389. Delivered by a blind carrier pigeon. Those 301s can’t get out of their own way.

What kind of engine did Pontiac have in 1930?

It was the same 251-cid 85-hp flat-head V-8 used in Pontiac’s almost-dead parent make, Oakland, during 1930 and 1931. In 1933 and 1934, Pontiac built only eight-cylinder cars, but they used a straight-eight rather than a V-8.

What kind of engine did the Pontiac Ventura have?

In 1977, a 301-cid engine was the base V8 in many models., while the Ventura used a 305-cid V8 made by Chevrolet or GM of Canada. There was also an Oldsmobile-built 403-cid “alternate” V8 for Pontiacs sold in California. The Pontiac 301 Turbo was produced for the 1980 and 1981 Trans Am.

What was the smallest version of the Pontiac V8?

As a division, Pontiac had only developed a single V8 engine, and the 301 was the smallest variant of the line. The 301’s bloodline could be traced all the way back to the Pontiac 287, which was introduced for 1955.