Which is the best tutorial for CATIA V5?

CATIA V5 Basic Tutorial 1 Introduction. Computer Aided Design-CAD is defined the use of information technology (IT) in the Design process. 2 Sketcher Module. The Sketcher workbench is a set of tools that helps you create and constrain 2D geometries. 3 Part Design Module. 4 Assembly Module 5 Drafting Module.

Who is the company that makes CATIA software?

CATIA (an acronym of computer aided three-dimensional interactive application) developed by the French company Dassault Systèmes.

What kind of tool is Catia sketcher Workbench?

CATIA (an acronym of computer aided three-dimensional interactive application) developed by the French company Dassault Systèmes. The Sketcher workbench is a set of tools that helps you create and constrain 2D geometries.

How is part design environment used in Catia?

Part design environment is used to create 3D models from the basic 2D sketches created in sketcher environment. In most CAD software, the equivalent of this is called EXTRUDE, but in CATIA we call it PAD. This command adds material in the third direction, a direction other than the sketch. The POCKET commands somehow the opposite of PAD command.

How to do rib extrude in CATIA V5?

2-4 CATIA V5 FEA Tutorials You will now use the ribbing operation to extrude the circle along the spine (path). Upon selecting the rib icon , the Rib Definition box opens. Select the circle (Sketch.1) and the spine (Sketch.2) as indicated. The result is the final part shown below. Regularly save your work. 3 Entering the Analysis Solutions

What are the basic elements of a CATIA application?

Below is the layout of the elements of the standard CATIA application. A, Menu Commands B. Specification Tree C. Filename and extension of current document D. Icon of the active workbench E. Toolbars specific to the active workbench F. Standard Toolbar

How to create a slider crank in CATIA V5?

4-2 CATIA V5 Tutorials in Mechanism Design and Animation Introduction In this tutorial you create a slider crank mechanism using a combination of revolute and cylindrical joints. You will also experiment with additional plotting utilities in CATIA. 1 Problem Statement

What is the equivalent of extrude in Catia?

In most CAD software, the equivalent of this is called EXTRUDE, but in CATIA we call it PAD. This command adds material in the third direction, a direction other than the sketch.