What sizes do eye bolts come in?

There are four main styles of eye bolts available in a variety of sizes and finishes:

• Regular, Shoulder, Lag, and Machinery.
• This is a ½” x 6″ shoulder eye bolt and a ½” x 6″ Stainless steel lag eye bolt.
• The ½” measurement references the diameter of the shank.
• The 6” measurement refers to the length of the shank.

How much weight can an eye bolt hold?

For example, an eye bolt with a 1/4 inch shank can typically hold up to 600 pounds at a straight pull (no angle). However, at a 15 degree angle, the maximum weight capacity drops to 480 pounds (80% of the “straight pull” weight capacity).

What are eye bolts used for?

Eye bolts can be used as a connection point for rigging, anchoring, pulling, pushing, or hoisting applications. Although eye bolts are commonly used in industrial applications, they’re also commonly misunderstood or used incorrectly.

What is needed for an eye bolt?

Plain Eye bolts must have full thread shank engagement, allowing for one-half turn for proper eye-alignment to obtain rated capacities. Orient the eye bolt in line with the slings. If the load is applied sideways the eye bolt may bend.

How are eye bolts designed to be used?

Eyebolts are used to attach an eye to a structure, through which rope, cable or shackles can be secured. A common use is to create a lifting eye so that a crane can be attached to machinery, with special purpose lifting eyes rated for their safe working load.

What type of load does eye bolt take?

Use plain or regular eye bolts (non-shoulder) or ring bolts for vertical loading only. Angle loading on non-shoulder bolts will bend or break them. Use shoulder eye bolts for vertical or angle loading. Be aware that lifting eye bolts at an angle reduces the safe load.

What are lifting eyes?

Lifting eyes, also commonly known as eye bolts, have widespread use in industrial plants. They are commonly used on dies, cabinets, compressors, heat exchangers, motors, molds, and other equipment to facilitate their movement, either when being installed or moved to a different plant location.

How do you lift with eye bolts?

How should you use eye bolts safely?

1. Orient the eye bolt in line with the slings.
2. Pack washers between the shoulder and the load surface to ensure that the eye bolt firmly contacts the surface.
3. Engage at least 90% of threads in a receiving hole when using shims or washers.
4. Attach only one sling leg to each eye bolt.

How do you install lifting eye bolts?

Attach only one sling leg to each eye bolt.

1. Inspect and clean the eye bolt threads and the hole.
2. Screw the eye bolt on all the way down and properly seat.
3. Ensure the tapped hole for a screw eye bolt (body bolts) has a minimum depth of one-and-a-half times the bolt diameter.

Which material is used for lifting eye?

Whenever lifting is to be accomplished with a threaded eye bolt or lifting eye, a forged product should be used as compared to a carbon steel or bent wire eye bolt. Bent wire eyes, even if welded, are made from low-carbon steel.

How do you screw an eye bolt into concrete?

Wrap a piece of tape one centimeter from the drill bit tip. Equip yourself with safety gear. Put your hammer drill into the “hammer drill” mode. Place your drill bit onto the surface of the concrete and turn it on.

How do you screw into concrete without a hammer drill?

The Best Way to Screw Into Concrete Without a Hammer Drill

1. Use a Small Masonry Drill Bit First.
2. Once You Have Drilled a Hole, Change to a More Significant Drill Bit.
3. If You Find Any Blockages, Use a Hammer and Nail.
4. Whilst Concrete Drilling, Apply Water to the Drill Bit and Hole.
5. Concentrate on Efficiency, Not Speed.

What is a lifting eye bolt?

Lifting eye bolts are fully forged threaded fasteners designed to bear more weight than standard eye bolts. They are used for both vertical and angular lifting. For angular lifting, a properly seated shoulder eye bolt must be used.

What is a bolt eye?

Definition of bolt eye. : a device like a clevis used to terminate a suspension rod or bolt.

What is a screw eye bolt?

An eye bolt is a screw with a loop on one end and threads on the other end. Eye bolts are commonly used to attach cables to objects, for instance attaching a string to the back of a painting to allow the painting to hang from a nail on a wall.

What is an eye nut?

Eye nuts (eyenuts) are fasteners with a looped head. They are designed to receive a hook or rope. Eye nuts are rated for different types of applications and are oval or round in shape.