What size are my U joints?
What size are my U joints?
For most cars, 1310-series U-joints are typical choice, but for performance applications, the rugged 1350-series joints are the better choice. The larger the series number, the larger the trunnion. Trunnions are the protruding shafts that the caps ride over. Larger trunnions equate to more torsional strength.
What are the dimensions of a 1330 U joint?
Understanding U-Joints
| Series | Cross Width | Cap Diameter |
|---|---|---|
| 1310 | 3.219 (3 7/32”) | 1.062 (1 1/16”) |
| 1310BC* | 3.219 (3 7/32”) | 2 @1.062 (1 1/16”) 2 @ 1.125 (1 1/8”) |
| 1330 | 3.625 (3 5/8”) | 1.062 (1 1/16”) |
| 1330BC* | 3.625 (3 5/8”) | 2 @ 1.062 (1 1/16”) 2 @ 1.125 (1 1/8”) |
What is the difference between a 1310 and 1350 U joint?
Size comparison between the 1310, 1350, and 1410 series U-joints. “A 1350 series joint is a bigger stronger joint,” Woods explained. The 1350 U-joint is rated for 2,200 lb-ft (minimum elastic limit) of torque. While the 1310 series, the stock size for most Jeeps, is rated for 1,600 lb-ft of torque.”
Do U joints have part numbers on them?
On all U-joint styles, the measured dimension should be slightly less than the dimensions you’ll use to look up the part number. Make sure to take note of the type and location of grease fittings and to write down your measurements.
What size is a 1410 U joint?
Outside Lock U-Joints by Series
| Series | Width | Cap |
|---|---|---|
| 1350 | 3.622 | 1.188 |
| 1410 | 4.188 | 1.188 |
| Handy Measurement Conversion | ||
| 1.062 = 1 1/16 | 2.438 = 2 7/16 |
How do you tell what u joint you need?
For U-joints with outside snap rings, you will need to measure from the edge of one u-joint cap straight across to the edge of the other u-joint cap. With these dimensions, it will be easy to identify what series of U-joint that you have. Another way to identify a u-joint is by properly measuring the pinion yoke.
What size is a 1410 u-joint?
What is the size of the U-joint on a Ford 9 inch?
The original equipment u-joint size was either 1310 or 1330 series. The 1310 series is commonly known as the “small” u-joint and the 1330 series is known as the “large” u-joint. Both of these can be found on the Ford 9 inch rears.
What kind of universal joints do I need for a Ford truck?
Choose from a variety of Dana Spicer and Neapco universal joints to fit Ford car and light truck driveshafts in 1310, 1330, 1350 and 1410 series as well as 4×4 front axle u-joints.
How big are the caps on a you joint?
U-Joints BY SIZE 1000 Series U-Joint 1.500 x 1.500 -.938 inch caps inside c clips 1100/1110 Series U-Joint 1.718 x 1.718 – 1 inch caps inside c clips 1100/1110 Series U-Joint 2.411 x 2.411 -.938 inch caps outside snap rings
How big is a 1350 U-joint series truck?
1330 U-Joint Series is very common and used on OE production. 1.0625 cap and 3.622 width. (1 1/16 x 3 5/8) 1350 U-Joint Series is used on trucks mostly for OE. It is also a Hi-Performance upgrade on cars. 1.188 cap and 3.622 width.