What is the red wire for on a ceiling fan?

For the light to be controlled by a switch that’s separate from the fan, the wiring between the switch and the fan unit needs a fourth conductor, a red wire to carry the hot feed for the light kit. Turn off the circuit breaker at the breaker panel that provides power to the ceiling fan circuit.

What do I do with the red wire in my ceiling light?

If the tester indicates the wire is hot, turn the switch off and retest. If the wire still is hot, the wire is a hot wire that delivers electrical power to the branch circuit. If turning the switch off turns the wire off, the red wire delivers power from the light switch.

What do you do with the red wire when installing a ceiling fan with a remote?

Connect the red wire from the ceiling to the black wire in the fan. Cap off the black and white wire from the output side of the remote receiver module….

1. So the white wire on the receiver is capped?
2. @user38908 The blue (or black depending on how you want it) coming out if the remote module would be capped.

What are red and black wires used for?

A black wire is often used in a circuit as a switch leg , the connection that runs from the switch to the electrical load. Red electrical wire indicates the secondary live wires in a 220-volt circuit, used in some types of switch legs and in the interconnection between smoke detectors that are hard-wired into the power system.

What is the Red Wire in a ceiling fan?

The red wire is most likely a spare wire that was intended to be used when wiring for a ceiling fan. Typically when a ceiling fan is installed the red wire is most commonly used for the light and the black is commonly for the fan motor.

How do you install ceiling fans?

How to Install a Ceiling Fan: Step by Step Instructions Step 1: Turn off the power Step 2: Unscrew the screws and nuts Step 3: Remove electrical tape Step 4: Disconnect the wires Step 5: Install the adjustable hanger bar Step 6: Assemble the fan Step 7: Complete the attachment of the fan Step 8: Install the trim and blades

What gauge wire for a ceiling fan?

For most home ceiling fan wiring the electrical box should have either 14 or 12 gauge solid copper wire in it. 14 gauge wire is for 15 amp 120VAC circuits and 12 gauge wire is for 20 amp 120VAC circuits.