What is Tank alert XT?

The Tank Alert® XT indoor/outdoor alarm system provides audio/visual warning of potential threatening liquid level conditions in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural and other non-potable water applications. Once the condition is cleared the alarm will automatically reset.

Why is my septic tank alarm going off?

Septic tanks typically come with alarms for a good reason. The septic alarms are meant to go off when the water level in your septic system’s pump tank is either too high or too low because either condition can cause damage to the system and should be prevented.

How does tank alert XT work?

The Tank Alert® XT indoor/outdoor alarm can serve as a high or low level alarm depending on the float switch model used. The alarm horn sounds and the red beacon illuminates when a potentially threatening liquid level condition occurs. A “power on” light on the switch indicates power to the alarm panel.

How do I turn off tank alert?

If your septic tank alarm gets triggered, push the red button or switch on the alarm box to turn it off. The green light should be on to indicate the alarm has power; the red light means the water level is getting higher than it should be.

What does it mean when your septic light is on?

Let the septic system run a couple of pump cycles (should last about 10-15 hours) and the red light on the alarm box may go out on its own. If the red light goes out, that means the system is working properly and just needed to catch up with the excess water overflow in the tank.

How does tank Alert work?

A tank alert alarm is an electronic system that monitors liquid levels in sump pump basins, holding tanks, sewage and other non-potable water systems. The alarm elicits a warning horn when it detects threatening liquid levels. The alarm is also used in homes with septic tanks and includes indoor and outdoor models.

Will a flooded septic tank fix itself?

A flooded septic tank is nothing to mess around with. There is a very small chance that your flooded septic tank will fix itself. As soon as you notice it has flooded, call a professional to diagnose the problem. Once the ground around the septic tank and drainfield has dried a bit, the tank will need to be pumped.

How do I silence my septic alarm?

If the alarm happens to be going off, the best thing to do is to push the red button or switch on the alarm box. This will turn off the alarm. There should be a red light and a green light located somewhere on the alarm box.

How do I know if my septic tank is full?

How to tell your septic tank is full and needs emptying

1. Pooling water.
2. Slow drains.
3. Odours.
4. An overly healthy lawn.
5. Sewer backup.
6. Gurgling Pipes.
7. Trouble Flushing.

What does flashing red light on septic tank mean?

The red light indicates the alarm is receiving a signal from the pump tank that the water level is rising higher or is dropping lower than it should be. Let the septic system run a couple of pump cycles (should last about 10-15 hours) and the red light on the alarm box may go out on its own.

How high is the water supposed to be in a septic tank?

A septic tank should always be “filled” to its normal liquid level, or the bottom of the outlet pipe which carries effluent to the absorption area. This normal liquid level is usually between 8” to 12” from the top of the tank on average (see picture at right).

How does the tank alert XT alarm work?

The Tank Alert® XT indoor/outdoor alarm system provides audio/visual warning of potential threatening liquid level conditions in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural and other non-potable water applications. If an alarm condition occurs, the horn sounds and red alarm beacon activates.

What should I do if my Kohler toilet tank overflows?

Replace the fill valve with a KOHLER fill valve if the float sinks. If lowering the tank water level does not correct the overflow problem, clean or replace the fill valve. If applicable: Adjust the trip arm bracket and flange so they are parallel with the top of the tank.

Is there a problem with my tank alarm?

There may be a problem with the alarm. Check to see if there is power to the unit. Push the “Push To Test” switch. If the red light comes on and the buzzer sounds then the alarm has power. There may be problems with the green LED. Return the alarm to the factory.

What to do if your Kohler engine is having problems?

Remember to follow all safety precautions before starting any work on your engine. If troubles persist after checking the possible causes listed or you are unable to identify the problem, call KOHLER Engines Customer Service at 1-800-544-2444 or contact your local KOHLER dealer.