What is CD50 oil?

CD50 is the timber protection oil originally developed for cedar weatherboards and all species of dry timber. CD50 controls a wide range of mould, fungi and bacteria, and is the oil of choice for: Weatherboards and timbers up to 50mm depth. Situations when better weather protection is needed at the surface.

How long does Cutek CD50 take to dry?

Unlike conventional paint films, Cutek CD50 is extremely slow drying to ensure maximum penetration into the timber is achieved. It can be as long as 72 hours after the first coat is applied before it can be recoated. The more oil that is allowed to absorb into the timber the longer the coating will last.

How to apply CD50?

If CD50 inadvertently comes in contact with concrete, clean off immediately with SARAClean Liquid. Apply evenly with brush, speed brush, roller or spray – remove excess drips and runs. Timber should be only slightly oily after application. Allow to “dry” before allowing foot traffic, if on a deck.

Do you need to stain kwila?

If your deck is Kwila, for example, you may want to use an oil to preserve its deep red-brown hue. Wood stains add colour. So if you want to enhance your timber with a new colour, or if your deck is very weathered, a stain could be the way forward.

How do you clean macrocarpa?

A 20 percent solution of household bleach in water with one ounce of detergent per gallon will usually remove the stain. Even after years of exposure Macrocarpa can be refinished to its natural bright, clean appearance. Many people prefer to allow their Macrocarpa furniture to age naturally outdoors.

What is Cutek?

Description. Cutek Extreme is a unique wood protection oil which keeps wood and engineered timber looking great for many years. It comes as a clear oil, with a choice of 10 colourtones (sold separately) which can be added to enhance the natural look of your project.

How do you clean Cutek oil?

scrub stubborn stains moderately with a stiff fibre brush. Removal: Once CUTEK® Restore has cleaned the timber, it must be water rinsed off thoroughly. For best results, power rinse with a high-pressure washer set to approximately 50 bar (750 p.s.i.) with a fan jet pattern.

Is it better to stain or oil decking?

If you want to maintain your wooden deck’s natural look, decking oil might be the suitable choice. But if you are looking for a preservative that will help you change the colour of your wooden deck, a decking stain is recommended.

Which deck stain is rated the best?

Our Picks Of The Best Deck Stains

• Ready Seal 105 Exterior Deck Stain. – Best Overall.
• Penofin Deep Penetrating Deck Stain. – Runner Up.
• Storm System Penetrating Deck Stain.
• Cabot Wood Toned Deck Stain.
• DeckWise Ipe Oil Hardwood Deck Stain.
• Olympic Stain Maximum Waterproofing Deck Stain.
• SaverSystem Semi-Transparent Deck Stain.

How often should I oil my cedar?

Oiling of your Cedar is a recommended procedure due to the ease of application, maintenance, and the fact that only 1 coat of oil is required for each re-treatment. That means less labour is required.

What does CD50 preservative oil do for wood?

CD50 is a deep penetrating timber oil designed to protect timber from the inside out. CD50 helps stabilise timber, so reduces warping, cupping and splitting. As CD50 does not form a film, there is no peeling or flaking, and maintenance is easy. CD50 also helps control the growth of mould and fungus, and rot bacteria in the timber.

When to use CD50 oil in indoor swimming pool?

Wider microbiological spectrum than CD50, so used where mould and fungus are an issue eg heated indoor swimming pools We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy.

How big is CD50 deep penetration timber oil?

Helps control the microorganisms that cause mould fungus and rot Coverage 7 to 9 sqm per litre for Bandsawn timber, 12 to 15 sqm per litre for dressed timber Deeply penetrating timber protection oil. Penetrates deeper and more rapidly than CD50, so excellent for hardwoods, decks, thick profile timber.

What makes cd-50 transmission oil so good?

Oil Durability: Designed to protect transmissions against higher torque and horsepower in severe service. Improved high temperature oxidation and thermal stability results in longer oil life by minimizing sludge and varnish deposits.

https://www.youtube.com/watch?v=DZAZOcBHAPg