What does FMI stand for in PID and mid?

Now that we have defined MID (The component) and PID (types of data), we can talk about Failure Mode Identifiers (FMI). Every diagnostic trouble code (DTC) that you find will have a FMI. This code is set by the ECM detecting a variety of problems, such as too much voltage, not enough voltage, resistance is in correct, and so on.

What is the fault code for a mid 128 engine?

Engine ECU Faults (MID 128) Fault Code Description FMI Codes MID 128 PID 26 Engine Fan Speed Percent 3,8 MID 128 PID 27 EGR Valve #1 Position Sensor 3,4,5 MID 128 PID 45 Preheater Relay Status 3,4,5 MID 128 PID 81 Particulate Filter 0,2,3,5,12

Where can I find the PID list for mid?

The entire PID list can be downloaded by filling out the form at the top of the page. It is approximately 11 pages total. Now that we have defined MID (The component) and PID (types of data), we can talk about Failure Mode Identifiers (FMI). Every diagnostic trouble code (DTC) that you find will have a FMI.

What is FMI 1 for Volvo mid128 engine?

FMI 1 For engines D6B, D7C, D10B, D12C: The fuel pressure is below normal. The fuel filter is clogged, fuel leakage, air leakage, the bypass valve opens at low pressure, the mechanical pump does not pump well or the sensor is faulty.

What is the resistance of the FMI sensor?

FMI 6 Resistance on contacts B9 and A12 of the instrument panel from the sensor is less than 25 kΩ. The signal wire is shorted to ground, the sensor is faulty, or the outside air temperature is above 90 degrees. FMI 5 Resistance on contacts B12 and A12 of the dashboard unit from the sensor is more than 5 kΩ.

What does mid stand for in car category?

Here are the most common ones: 1 MID 128 = Engine 2 MID 130 = Transmission Control Unit 3 MID 136 = Anti-lock Brakes (ABS) 4 MID 140 = Instrument Cluster 5 MID 142 = Satellite Communications 6 MID 144 = Vehicle ECU 7 MID 146 = Climate Control ECU 8 MID 206 = Radio 9 MID 216 = Lighting Control Module 10 MID 219 = VORAD/ACC