What ATF is compatible with dexron 3?

Dexron VI fully replaces Dexron III and prior evolutions of the Dexron fluids. GM manufactured the liquid for compatibility with transmissions requiring earlier versions of the fluid. Dexron VI works in any vehicle that requires ATF-A (the original automatic transmission fluid) or a Dexron variation.

Is ATF and dexron 3 the same?

“ATF +3” is the same as “ATF TYPE III”? ATF+3 /ATF type 111 is a aftermarket fit all for the cry 5156 fluid. And should not be used where dexron 3 /mercon /dexron is required.

Is ATF dexron 3 synthetic?

The Valvoline Type F transmission fluid is a high quality NON-friction modified fluid. DEXRON® III/MERCON includes friction modifiers in the fluid additive package. Does Valvoline make a synthetic ATF? MaxLife® ATF, ATF +4 and DEXRON® VI are all synthetic transmission fluids.

Is dexron 3 backwards compatible?

1998 – DEXRON III(G) GM Dexron-III(G) licensed products have a license number on the can that begins with the letter G. This fluid is backward compatible with all previous Dexron fluids as well as the Type “A” Suffix “A”, and the Type “A” fluids produced from 1949 to 1966.

What is the difference between ATF 3 and ATF 4?

Most Chrysler cars and trucks use ATF +3 or ATF +4. It is vital that you use only these in vehicles from Chrysler. ATF +4 is a synthetic fluid for finely-tuned transmissions, so if you use a non-synthetic ATF instead of ATF +4 in a car or truck that calls for it, you could damage the transmission.

Is dexron 3 the same as mercon?

Though similar to Dexron in its red color, there are a few differences chemically. Mercon has a different flash point from Dexron. Mercon has a flash point of 170 degrees Fahrenheit and a fire point of 185 degrees.

Can I use DEXRON III instead of DEXRON VI?

DEXRON-VI can be used in any proportion in past model vehicles equipped with an automatic transmission, in place of DEXRON-III (for instance, topping off the fluid in the event of a repair or fluid change). DEXRON-VI is also compatible with any former version of DEXRON for use in automatic transmissions.

Can DEXRON 3 be used as power steering fluid?

Can Dexron III be used as power steering fluid? Yes, you can. Automatic transmission fluids are some of the safe alternatives to power steering fluids.

Can you mix DEXRON III and DEXRON VI?

Try not to mix DEXRON-III with DEXRON-VI, only because if you do that you are in fact diluting the DEXRON-VI fluid with a less stable product and therefore throwing away much of the advantage. All you need to remember is that DEXRON-VI is far superior to DEXRON-III.

Should I use dexron III or VI?

The GM site says to STAY AWAY FROM DEX III, and only use DEXRON VI. Dexron VI is a lot more stable at higher temperatures and lasts longer. It can also be used to top off dexron 3, however, you can’t use dexron 3 if you already have dexron 6 originally in your trans, or if it has been flushed with dexron 6.

Can dexron 3 be used as power steering fluid?

Do not use DEXRON VI as a power steering fluid. It is marked on the bottle not to be used as power steering fluid. DEXRON III/MECRON would be a better choice for cars where the manual specified DEXRON II, which is no longer on sale.

Can you mix ATF 3 and ATF 4?

ATF+4 is backward compatible with ATF+3 so you can use it with no issues. The factory recommendation for your 1996 van is to have the fluid serviced every 30,000 miles; 100,000 is way-WAY too long.