How wide is an 8 rib serpentine belt?

1.094 in
Belt Width (in.): 1.094 in.

How do you count the serpentine belt on a rib?

What Is the Ribbed Belt Profile and Number of Ribs? Ribbed belts have lengthwise grooves on the inside. Measure the pitch of the groove, i.e. distance between projections, e.g. 3.54 mm = belt type PK. Count the number of grooves, i.e. the number of projections – e.g. 7, as shown in the picture.

What do the numbers on a serpentine belt mean?

Most v-ribbed belts, commonly referred to as serpentine belts, contain two different part numbers. EXAMPLE: 6PK1003 » 6 – This indicates the number of ribs on the belt; therefore, this is a 6-rib belt. » PK – The “P” indicates a metric designation, and the “K” indicates the belt is automotive per SAE J1459.

How do I know what size my serpentine belt is?

Measure the length of string it took to wrap around the path of the serpentine belt. Purchase a belt one size smaller than the size you measured. The actual belt will have tension on it, whereas the string doesn’t. For example, if you measured 80 inches, purchase a belt that is 79 1/2 inches.

How wide are serpentine belts?

A typical serpentine belt, by comparison, will measure about an inch wide but only about one eighth of an inch thick.

How wide is a 6 rib serpentine belt?

6-Rib Serpentine Belt, Industry Number 5060317, 32.39 in Outside Length, 0.4 in Top Width.

Can you replace a serpentine belt yourself?

You can replace a serpentine belt with ordinary hand tools. But we don’t recommend it. The spaces are often tight and the belt-driven devices difficult to reach. The belt placement tool allowed us to remove and properly place the new belt without reaching down into the pulley area.

Is serpentine belt same as alternator belt?

If the serpentine belt is not powering the alternator, then the engine has an alternator belt. It’s a small belt that powers only the alternator. Depending on the design of the engine, the alternator belt may also power the power steering pump. Without an alternator belt, the battery won’t stay charged.

Can you bypass the AC with a serpentine belt?

Sometimes a problem with your air conditioning compressor can cause it to actually lock up. There is a way around this problem however; you can actually bypass the compressor all together with a different serpentine belt.

How much will a serpentine belt stretch?

Stretch belts can last 100,000 miles or more, but this can vary dramatically depending on the vehicle’s environment and where it is mounted. This is why inspection is recommended; You cannot simply go by mileage recommendations.

How expensive is it to replace a serpentine belt?

But what does a serpentine belt replacement cost? Of course, it depends on your make and model as well as labor costs, but in general a replacement serpentine belt costs around $70-$200 (plus taxes and fees), including around $50 for the belt and around $150 for the labor.

How long will a serpentine belt last with cracks?

between 60,000 and 100,000 miles
How long will a cracked serpentine belt last? Serpentine belts typically last between 60,000 and 100,000 miles (although some claim that they last anywhere between 30,000 to 150,000 miles). Still, that doesn’t mean you should wait until the 100,000-mile mark to check on your belt.

How to get a serpentine belt cross reference?

SERPENTINE BELT CROSS REFERENCE Customer Service: 800-95-BANDO | [email protected]| www.BandoUSA.com W O R L D C L A S Q U A L I T Y SI N CE 1 9 0 6 Metric 6 Number of Ribs Size of Rib Number of Ribs Length in 10th of an inch Millimeters x 0.03937 = inches Inches x 25.4 = millimeters Metric Pitch – Size of Ribs Number of Ribs

What are the sizes of serpentine K belts?

V-Belt Cross Reference Sizes for 6 Rib K Series Serpentine Belts. Simply, You will find the belts sizes for 6 Rib K Series Belts. Gates, Dayco, Goodyear, Bando, Cadna, Pix, and more belt cross references available.

What kind of engine belt is Alliance serpentine?

If you want to get 100,000 miles out of a belt, choose an Alliance™ Parts serpentine belt for your truck’s engine. The Alliance™ serpentine belt is made from high-strength ethylene propylene diene monomer (EPDM), which lasts significantly longer than traditional neoprene belts.

How does the serpentine belt work on an O’Reilly car?

Touch device users, explore by touch or with swipe gestures. When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures. The serpentine belt connects the pulleys of the engine’s accessory drive.