How much HP can a 318 make?

A street-worthy 318 can easily make 400 horsepower, about what a lot of street 360s put out.

How much boost can a stock 318 handle?

You shouldn’t run any boost without the right fuel and no more than 4 PSI without dealing with timing. A 318 with many rigs out there is running as much as 25 PSI.

How do you turn a 318 into a 340?

to achieve 340 cubics with a 318 you will need a stroker crank. yep, to get up to 340 with a 318 you’ll need a stroker kit. around 1500$ or more for a kit with everything you need, including the crank, bearings, pistons, rings, and connecting rods. Get a 360!

How can I get more horsepower out of my 318?

IF you just want to make BETTER power than a tired *** old 318 has, that’s easy. Have the stock heads rebuilt with a 3 angle valve job and new guides, possibly even shaved for a little more compression, get a set of ****** headers, Edlebrock intake, a medium street strip cam say about 280 degrees of duration.

Is 318 a good motor?

The Good And The BadIn terms of durability, the Mopar 318 is robust. The bottom end of most 318 engines used a cast-iron crankshaft, and though these are not as desirable as a forged crank, the cast-iron piece has proven to be very reliable.

Can you put 340 heads on a 318?

The 2.02 valves on a 340 head are complete overkill on a 318 unless you are running it constantly in the higher rpm’s. The larger valves can actually hurt your low end.

Will 340 heads fit on a 318?

Is the Mopar 318 a good engine?

What is a 318 stroker?

Mopar’s 318 small-block engine is the ultimate sleeper engine. One of the most common Mopar V8s of all-time, the 318 is reliable, affordable, and readily available. Since most 318s are extremely durable too, the unassuming little engines make the ultimate foundation for a potent stroker engine.

Will 360 heads fit on a 318?

yes… 360 chambers are larger…that is why the talk about milling the heads… 302 head has the same small ports and valves as the 318 head in stock form.

What liter is the Dodge 318?

The 5.2-liter 318 CID is a lightweight, single cam engine with hydraulic roller tappets. Its cylinder blocks and cylinder heads are made of cast-iron, and its camshaft is made of nodular cast-iron.

Will 318 heads fit on a 273?

You can install the newer 318 closed-chamber heads circa 1966/67,on your 273 as long as you also bring along any later matching intake. But I think 318 heads are spec’ed at 60cc, versus 273s at 57cc; I think. AFAIK all 273/318 heads had the same valve sizes of 1.78/1.50 ..

Which is the best Mopar 318 stroker kit?

CNC-Motorsports offers the best selection of Mopar/Chrysler 318 stroker kits. We offer street kits with pump gas pistons to wild fully forged rotating assembly kits to meet your racing needs. We offer quality name brands such as; Eagle, Scat, Callies, K1, JE/SRP, Diamond, Wiseco, Mahle CP and Keith Black to name a few.

What’s the displacement of a 318 stroker engine?

Dyno pull of my 318 stroker (390) – YouTube Dyno pull of my 318 with a 4″ stroker kit, bringing the displacement to 390 cubic inches. It’s a very simple and mild street engine combo, consisting of 9.3… Dyno pull of my 318 with a 4″ stroker kit, bringing the displacement to 390 cubic inches.

How big is a dyno pull on a 318 Stroker?

Dyno pull of my 318 with a 4″ stroker kit, bringing the displacement to 390 cubic inches. It’s a very simple and mild street engine combo, consisting of 9.3… Dyno pull of my 318 with a 4″ stroker kit, bringing the displacement to 390 cubic inches. It’s a very simple and mild street engine combo, consisting of 9.3…

Which is the best Mopar engine for street use?

The 318 engine is absolutely the best all-around small block Mopar, in my opinion. It can easily make 400 plus horsepower and still has great street manners. If you’re building for fuel economy, the 318 beats the Mopar 340 and 360, hands down.