How do you take the back seat out of a 66 Mustang?

Pull up on the front edge of the seat bottom. It will pop off its holders, and you can pull it out. The seat back will have two metal loops on the bottom. There may be screws through these, if so, remove them.

How do you take the back seat out of a 1965 Mustang?

Take your hand and just lift up and it should pop out. Then your back seat may have 2 screws at the bottom holding it in, if so remove them then lift up on the rear seat and remove it. Then you can remove the interior quarter trim.

Can you legally remove rear seats?

For anyone else planning to remove rear or front pax seats like myself here’s some info. I have researched. RMS requires you to have the vehicle inspected and re-classified as a lower seating capacity if you remove any pax seats. Also you have to remove any part of the seat belts relating to removed seats.

How much do Mustang rear seats weigh?

OEM Rear Seat | 30.8 lbs.

Do the back seats fold down in a 2017 Mustang?

The 2017 Mustang fastback coupe has 13.5 cubic feet of trunk space, which is more than most sports cars offer. Fastback models come standard with a 50/50 split-folding rear seat.

Is it hard to remove car seats?

Removing the seats is relatively easy if you take your time and be careful. Front bucket seats are typically held down by four bolts on the ends of the runners at the base of the seat, two in the front and two in the back. These are removed using a socket wrench.

Will a car pass MOT with no back seats?

You need to remove the rear seat belts though, or the tester won’t be happy as someone can still attempt to sit in there. With no rear seat belts, their arse is covered at the time of the test that you’ve blatently removed the rear seats. It will appear as an advisory on your MOT report though.

Did 1965 Ford Mustangs have seat belts?

Seat belts were mandatory for the front seats on all cars in 1965 and were installed by Ford on the assembly line. Rear belts were a dealer accessory in 1965. In 1966 front and rear belt were mandatory, in 1964 seat belts were optional.

Did 1967 Mustang have seat belts?

1967: Standard Belts include Retractors. Shoulder Harness Optional, Require Deluxe Belts. 1968-1969: Same units for both years and they should Include Retractors and Shoulder Harness Standard.

What is a S550?

The sixth generation Ford Mustang (S550) is the current iteration of the Mustang pony car manufactured by Ford. The new Mustang was introduced as a 2015 model year vehicle, marking the fiftieth anniversary of the Ford Mustang, which was revealed as a 1965 model year vehicle on April 17, 1964.