How do you set up a cryo cuff?
How do you set up a cryo cuff?
How to use a cryocuff:
- Connect the blue tube to the cooler.
- Add cold water up to the line inside the cooler.
- Fill the cooler the rest of the way with ice.
- Lay the insulated disk on top of ice and close the lid tightly.
- Let the cooler sit for 5 minutes. Shake it occasionally to cool the water.
How do you measure for Cryo Cuff knee?
Measure around the thigh 15cm (6″) above the top of the knee cap: Small 25-50cm (10″-20″) Medium 45-60cm (18″-24″)
How do I clean my Aircast Cryo Cuff?
Periodically clean cuff, tube, and cooler using a few ounces of liquid soap added to hot water in cooler. Recycle soap/water mixture between cooler and cuff a few times, then repeat with warm water only. Rinse com- pletely. Do not use an elastic wrap in conjunction with the Cryo/Cuff.
How do you deflate Cryo Cuff?
To deflate, press button at base of bulb. 12. When desired compression is attained, switch to “OFF” position and remove tube with bulb from valve connection. Note: Splint may also be deflated by removing tube while in “ON” position.
How long should I use a cold therapy machine?
If using icepacks, it is recommended that you use them for 30 minutes as often as every 2 hours as needed for pain relief.
What is knee cuff?
Knee sleeves They are designed to provide compression around the knee joint. This helps support the knee, and can control pain and swelling.
What are the contraindications of cryotherapy?
The following conditions are contraindications to whole body cryotherapy: Pregnancy, severe Hypertension (BP> 180/100), acute or recent myocardial infarction, unstable angina pectoris, arrhythmia, symptomatic cardiovascular disease, cardiac pacemaker, peripheral arterial occlusive disease, venous thrombosis, acute or …
Should I sleep with an Aircast on?
Depending on your injury, it is sometimes recommended that you sleep with your walker boot on so that you continue receiving support. If you do have to leave the boot on, loosen the straps for comfort.
How to apply knee cryo / cuff icunit with Aircast?
• Use only Aircast CryoCuffs and ArcticFlow Cuffs with Aircast Cryo/Cuff ICUnit. • Secure Knee Cryo/Cuff top strap snugly. Apply bottom strap loosely. Adjust front strap. • Carefully and completely read instructions supplied with the specific Cryo/Cuff prior to application. Please follow the instructions below to continue cooler preparation.
How to fill a cryo cuff in an ICU?
1. Make sure unit has ice and water filled to the line indicated inside the cooler. 2. Check power connections at wall and at the unit. 3. Make sure to fill Cryo/Cuff prior to operating unit as instructions indicate. 4. Check Cryo/Cuff connection; make sure to listen for a click when connecting the hose to the Cryo/Cuff. 5.
How to prepare for an ankle cryo cuff?
STEP 1 – Before applying the Cryo/Cuff, prepare the cooler (Figure 1) 1. Connect the blue tube to cooler. 2. Add cold water to line inside cooler. 3. Fill with ice. 4. Lay insulation disk on top of ice. Attach cooler lid snugly. 5. Allow five minutes with occasional shaking to chill water. STEP 2 – Always apply EmPTy Ankle Cryo/Cuff (Figure 2)
How do you put a cuff on a cryocuff cooler?
Add cold water up to the line inside the cooler. Fill the cooler the rest of the way with ice. Lay the insulated disk on top of ice and close the lid tightly. Let the cooler sit for 5 minutes. Shake it occasionally to cool the water. Apply the empty cuff: Wrap the cuff around the area to be cooled.