How do you memorize a CDL pre trip inspection?

The only way to memorize the pre-trip is to repeat it over and over. Start with the engine area and work your way around the truck and finally inside the cab. There is no way around consistent repetition. The more you do it the more you will memorize it.

What do you say in a pre trip inspection?

The Pre-Trip Inspection is a verbal test. Say at least 2 things about every item you inspect. Point to, or touch, every item that you inspect. Mention all damaged items to the tester.

What is normal to find in a pre trip inspection?

The Pre-Trip Inspection is a thorough inspection of the vehicle and all of its major systems. You will have to do thorough safety inspections of the coupling system, the vehicle lights, engine compartment, tires and brakes, the chassis, the fuel tanks, and an in-cab inspection.

What is the second thing you should do on a pre trip inspection?

Next step for the pre-trip inspection is to check the side of the trailer and the tandems.

• Wall – Make sure the wall is not damaged.
• Lights – Lights should be on and flashing.
• Tires – Tires should be properly inflated and have decent tread.
• Hub seal – Make sure it’s not leaking and wiped with oil if transparent.

Which state has the hardest driving test?

Washington state
KOMO News recently reported on a study by Siegfried and Jensen, which says that Washington state is the hardest state in the nation to pass the driving test.

How do I get a pre-trip inspection?

Steps in Studying for a CDL Pre-Trip Inspection

1. Make sure kingpins, ball joints, and shocks look good and have lubrication.
2. Check fluid levels including windshield washer fluid, coolant, and oil.
3. Look at steering axle tires for uneven wear.
4. Look for fluid drips or leaks in and around the engine.

How much can you miss on CDL pre-trip?

The pre-trip inspection presents 15 defects, five of which are worth 12 points and 10 of which are worth four points. The highest score possible is 100 points. The skills test challenges drivers with six obstacles, or “problems,” each of which are worth up to 50 points.

What is a pre-trip vehicle inspection?

The importance and benefits of completing a pre-trip inspection. A pre-trip inspection is exactly what it sounds like: a thorough check of a fleet vehicle before a driver takes it on the road. They should be conducted before each and every trip.

What is the 7 step inspection method?

1. Overview (4)
2. Engine (4)
3. Cab (4)
4. Heads/Hazards (4)
5. Walkaround I.
6. Walkaround II.
7. Signals (4)
8. Brakes (4)

When you do a walk around inspection you should check?

25. What are some things you should check on the front of your vehicle when doing the walk-around inspection?

• Low beams, high beams, four way flashers, turn signals.
• Tires, steering parts, suspension parts, headlights.
• None of these.
• Windshield, wipers, mirrors, hood latches.
• Oil, transmission, air compressor, radiator.

What is a pre – trip vehicle inspection?

A pre-trip inspection is a federally mandated inspection of a vehicle done daily within a 24-hour driving period to ensure its roadworthiness.

What is CDL Manual?

The CDL Manual, also known as the CDL Handbook, is the training manual you will study in order to pass the written test to obtain your commercial learner’s permit. The commercial learner’s permit allows you to drive a tractor trailer as long as you have a licensed CDL holder in the vehicle with you.

What is a CDL road test?

CDL On-Road Driving Test. The road test is conducted on street and requires the driver to demonstrate skill in normal traffic situations such as: turns; intersections; lane changes; stop/start; etc. The road test is described in Section 13 of the Free CDL Handbook (Commercial Driver’s License Manual).