How do you calculate torque from kW?

1. Torque (lb.in) = 63,025 x Power (HP) / Speed (RPM)
2. Power (HP) = Torque (lb.in) x Speed (RPM) / 63,025.
3. Torque (N.m) = 9.5488 x Power (kW) / Speed (RPM)
4. Power (kW) = Torque (N.m) x Speed (RPM) / 9.5488.

How do you calculate motor torque?

To calculate load torque, multiply the force (F) by the distance away from the rotational axis, which is the radius of the pulley (r). If the mass of the load (blue box) is 20 Newtons, and the radius of the pulley is 5 cm away, then the required torque for the application is 20 N x 0.05 m = 1 Nm.

How do we calculate torque?

A practical way to calculate the magnitude of the torque is to first determine the lever arm and then multiply it times the applied force. The lever arm is the perpendicular distance from the axis of rotation to the line of action of the force. and the magnitude of the torque is τ = N m.

How is motor power calculated?

Power = (Force x Distance) / Time For electric motors, power or horsepower can be calculated from the torque and speed. For example, if you have a motor rated for 3,000 RPM and 6 in-lbf then the horsepower is calculated below.

How do you calculate rpm torque?

To calculate torque from RPM, use this formula: Torque = (Motor Horsepower) x 63025 x Service Factor / RPM.

How much torque does a 1 hp motor have?

The 3600 RPM, 1HP motor produces 1.5 ft. lbs. of torque at 3600 RPM. So if your 1HP pump was operating at 1800 RPM, the 1800 RPM motor would be producing 3 ft.

What is the torque of a motor?

In simple terms, the definition of torque is the engine’s rotational force. It differs from horsepower as it refers to the amount of work an engine can exert, while horsepower defines how quickly that work can be delivered. It’s why torque is often referred to in layman’s terms as ‘pulling power’, ‘oomph’, or ‘grunt’.

What is torque example?

Torque is the expression of a rotational or twisting force. The engines in vehicles rotate about an axis, thus creating torque. It can be viewed as the strength of a vehicle. Torque is what rockets a sports car from 0-60 in seconds.

How do you calculate motor kW?

Multiply the motor voltage by the full-load current. The result is in watts. Divide watts by 1,000 to give kilowatts. For example, 230 volts x 20 amps = 4,600 watts; 4,600 watts divided by 1000 = 4.6 kilowatts.

How do I measure motor torque?

A relatively simple method to estimate torque on the output shaft of an electrical motor is to measure its electrical power input via an electrical power meter. The meter calculates the power input by measuring the current and voltage in the line driving the motor.

How to calculate the torque of a motor?

Answers and Replies Decide how you are going to drive the unit. Calculate the acceleration, velocity, and position vs time curves for your chosen drive. Check the peak velocity against gear ratio, RPM, or flow rate (if hydraulic). Calculate acceleration torque from the mass moment of inertia. Plot acceleration torque and static torque on same axes.

What’s the formula of a torque motor?

The speed of the motor can be found by using Speed measurement devices. Hence motor torque T = P / ω . Here omega ω is equal to 2 x pi x N (rpm) / 60. For DC Motor torque Formula: For Calculating, Torque for DC motor. T = V x I / (2 x pi x N (rpm) / 60) N (rpm) is the speed of the motor. V => Input DC Voltage. I => Input DC Current

How do you calculate electric motor torque?

How to Calculate Electric Motor Torque. Watts = volts * amps. 1HP (horsepower) = 746 watts. Torque (T) = ((HP(horsepower) / RPM (rotations per minute))) * 63,025 (constant) 1. Find the wattage from a motor that has the following nameplate data on its metal tag; 120 Volts at 10 amperes with a 3600-RPM.