How do I use MegaRAID Storage Manager?

1. Select [Start] → [Programs] → [MegaRAID Storage Manager] and click [StartupUI]. 2. Select the server to be controlled by local and/or remote computers and click [Connect].

What is LSI MegaRAID Storage Manager?

The MegaRAID Storage Manager (MSM) program provides you with graphical user interface (GUI) tools to configure RAID storage systems, based on the LSI 106x controllers used in some of the x64 servers. To determine if your server supports this program, refer to the Product Notes for your platform.

How do you set up a MegaRAID?

On the BIOS Setup Utility screen, select the Advanced tab, select Avago MegaRAID Configuration Utility, and press Enter. From the ACTIONS Menu, select Configure. Select Create Virtual Drive and press Enter.

How do I use MegaRAID BIOS config utility?

Answer

1. Boot the system and look for the BIOS Boot menu screen hotkey and press it a few times. It is usually F8 or F11.
2. At the MegaRAID BIOS, press control H.
3. The BIOS will be ignored and the system will end POST with the BIOS boot menu.
4. Select the MegaRAID controller.

How do I install MegaRAID storage Manager on Windows?

Navigate to \windows\wk3\packages\ (on the CD) or wk3\packages\ (in the archive). 3. Run the installation application in this directory. This is a file with a name of the form InstallPack xxxxxx .

What is raid10 storage?

RAID is an acronym for Redundant Array of Independent (or Inexpensive) Disks. It is a method of storing information on multiple hard disks for greater protection and/or performance. RAID 10, then, is a combination of levels 1 (mirroring) and 0 (striping), which is why it is also sometimes identified as RAID 1 + 0.

How do I enable JBOD?

To enable JBOD mode, you need to go to the second settings screen. To do this, tab to the < Next > option.

How do I access WebBIOS?

Here’s the simplest procedure I could come up with, to enter LSI WebBIOS at power on:

1. Power On.
2. Press Ctrl+H when prompted by LSI BIOS.
3. Press F11 when “Press F11 for Boot Menu.” appears.
4. Use down arrow or mouse to choose “RAID: PCI ROM Setup, B01 D00 F0” and double-click (or press Enter)
5. Choose Adapter No.

What is LSI storage authority?

Description. The LSI ® Storage Authority (LSA) is a web-based application that enables you to monitor, maintain, troubleshoot, and configure the Broadcom MegaRAID products.

How do you use MegaCLI?

MegaCLI is a tool used as a command-line interface to communicate with the LSI family of RAID controllers….Install and Set Up MegaCLI

1. Step 1: Verify Your Hardware RAID Controller.
2. Step 2: Download MegaCLI.
3. Step 3: Extract the MegaCLI Package.
4. Step 4: Install MegaCLI.

How to run MegaRAID Storage Manager ( MSM )?

Running MegaRAID Storage Manager (MSM) MSM is a GUI Java application.To launch MSM, execute the following command: $ /usr/local/MegaRAID\\ Storage\\ Manager/startupui.sh The username is root and the password is the root password for the system. After logging in enter the IP address of the system you wish to manage and click on the Update button.

What kind of software do I need for MegaRAID?

These include the MegaRAID™Configuration Utility (CU), WebBIOS™CU, MegaRAID Manager™, and Power Console Plus™, which enable configuration and management of RAID systems using the MegaRAID controllers. Audience This document assumes that you have familiarity with storage systems, and are knowledgeable about PCI, SCSI, and Serial ATA interfaces.

How to install MegaRAID SAS on Linux 10?

Choose Properties and click on Go. 21.Choose Make Global HSP then click on Go. 22.Click on Home. MegaRAID SAS User Guide for Linux 10 23.Click on Exit. 24.Click on Yes to confirm. 25.Reboot the system. MegaRAID SAS User Guide for Linux 11 Storage Manager Installation

Is the MegaRAID Storage Manager a registered trademark?

TRADEMARK ACKNOWLEDGMENT LSI Logic, the LSI Logic logo design, MegaRAID, and MegaRAID Storage Manager are trademarks or registered trademarks of LSI Logic Corporation. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation. Linux is a registered trademark of Linus Torvalds.