How do I tell what year my Clark forklift is?

Don’t panic. A Clark forklift’s serial number can be found physically stamped right on its frame. Often, this number is stamped in the left-hand frame member of the chassis. For example, to the right is the frame stamp from the forklift shown above.

How do I find out what year my forklift is?

Since 1995, the last character (letter) of a Hyster or Yale forklift serial number designates the year of manufacture. The letters “I,” “O,” and “Q” are not used since they are easily misread.

What engine is in my Clark forklift?

Its 4.3-liter LPG engines power CLARK forklifts in the 4-ton to 7-ton class, while its 3.0-liter LPG engine powers 2.5-ton to 3.5-ton lifts. CLARK utilizes PSI’s 2.0-liter and 2.4-liter LPG engines in 2.0-ton to 3.3-ton products.

Where is the serial number on a forklift?

In many cases a forklift’s serial number can be located in the electronics system. It can also be found on its frame as a numerical metal stamp.

How much does a Clark forklift weigh?

Clark CMP25 forklift weighs 8,254 lbs. or 3752 kg. Nissan TX30 weighs 5,220 lbs or 2373 kg. Forklift batteries can add 2000 lbs or weight or 909 kg to a forklift.

How do you read a Toyota forklift serial number?

The model series is followed by a series of letters, the first of which designates the category of the industrial vehicle. A “B” after the model series designator indicates the forklift has baselegs, which is commonly seen in model numbers for reach trucks and walkie stackers.

Does a forklift have a VIN number?

Does a forklift have a title? No title for forklifts because they were not meant to be licensed. They are legally transferred with a bill of sale (Invoice) that includes the serial number and the date.

Who makes Clark forklifts?

Clark Material Handling Company
Clark Material Handling Company (or CMHC) is a manufacturer of forklift trucks based in Lexington, Kentucky. The company has a production plant in Changwon, South Korea….Clark Material Handling Company.

How do I read my Yale forklift serial number?

To figure out the year your Yale forklift was manufactured, you’ll need to read the serial number and look for a letter in the last position. In the example image the serial number is B875B04662D. The last letter in the serial number is D so using the legend below, the year of manufacture is 2006.

How old is my crown forklift?

On a Crown, the age of the equipment is stamped on the side of the mast in the following format: mm-dd-yy. Ask the seller to send you a photo of this information when selling the lift truck.

How heavy can a forklift lift?

Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs. You can find the rated capacity of a forklift on its data plate. OSHA requires “only loads within the rated capacity of a truck shall be handled.” It’s easy to think the rated capacity is the same as maximum capacity, but it’s not that simple.

How much can a 5000 lb forklift lift?

A 5,000-lb. capacity forklift will lift that much weight up to 48-inch forks (with a 24-inch load center) but going out to 60 inches (with a 30-inch load center), for example, drops the capacity to 4,000 pounds.

Where can I find the Clark forklift service manual?

These Clark forklift service manuals by model number are listed below by forklift model and manual type. If available for instant download, there will be a link. If you do not see the make and model you are looking for, then please click on this link and email our staff in order to request a specific manual.

Where can I find the serial number on a Clark lift truck?

Depending on the age or model of the CLARK lift truck, you may find the serial number stamped into the frame exterior, the cowl exterior, or a fender. Can I still get an operator’s, parts, or service manual for my old CLARK lift truck? Photo copies of CLARK operator’s, parts, and service manuals are available for most older CLARK lift trucks.

Where is the serial number on a Nissan Forklift?

Nissan forklifts have their data near the middle of the engine. Some brands, like Komatsu will have their information above front drive tire. On a Clark forklift, nameplate can be found near the seat or the dashboard. Also, many of the Clark forklift’s have their serial number stamped on its frame.

Where do I get a Clark Custom part book?

CLARK Custom Parts Books do not include part numbers. Parts are ordered from a CLARK dealer by providing the key number of the part desired and the truck serial number. However, if you require CLARK part numbers, a CLARK SPN (Specific Part Number) manual can be ordered from your CLARK dealer. Contact your CLARK dealer for details.