How do I reset my Lexmark x264dn PC kit?

Press and hold the Stop button for five seconds or until the message Resetting PC Counter appears on the printer display panel. The printer will display Resetting PC Counter for a few seconds, then return to Close front door. The photoconductor page count should now be reset. Close the front cover.

What does replace PC kit mean on Lexmark printer?

photoconductor cartridge
Overview. The printer posts a Replace PC Kit message when the photoconductor cartridge is down to its last 10% of life (or after the equivalent of 72,000 drum rotations). Once the photoconductor reaches 0%, the printer will stop operating and a new message of Replace PC Kit to Continue will appear on the printer screen …

How do I reset my Lexmark Imaging Unit?

Reset PC Counter

1. With the power on, open the front door.
2. Press and hold the cancel button (X). After a few seconds, the printer will flash its indicator lights telling you it’s resetting the life counter.
3. Close the front door.
4. The printer should restart automatically.
5. Enjoy your new imaging unit!

How do you reset a photoconductor Lexmark e352dn?

To reset the photoconductor page count:

1. Turn off the printer.
2. While the printer is off, press and hold the Select ( ) and Return ( ) buttons on the operator panel.
3. While keeping both buttons held down, turn the printer back on.
4. Release the buttons when you see either of these messages.

What is PC Life Warning?

Photoconductor
Error messages. A Photoconductor (PC) Life Warning or an 84 – PC Kit life message indicates that the photoconductor unit is near the end of its functional life and should be replaced soon. The recommended action is to replace the photoconductor unit or have an extra one in stock.

What is the PC kit on a printer?

The Photoconductor (PC) kit, also known as the imaging drum, is a consumable item which must be replaced every 30,000 pages. Replace the imaging drum and reset the life counter.

When should Photoconductors be replaced?

A Photoconductor (PC) Life Warning or a Replace Photoconductor message on the printer screen indicates that the photoconductor unit in the printer is near or past its expected life rating of 30,000 single-sided pages. You will need to replace the photoconductor unit inside the printer when you see this message.

What is a PC kit for Dell 2350dn?

How do I reset my Lexmark toner chip?

How to Reset a Toner Chip for a Lexmark

1. Switch the printer off.
2. Press and hold down the “Ready” and “Return” buttons on the printer.
3. Select “Maintenance Count.”
4. Select the option “Reset” for returning the chip’s toner level to zero.
5. Tip.

How do you reset the maintenance kit on a Lexmark ms811dn?

To reset the maintenance count perform the following procedure:

1. Turn off the printer.
2. Enter the Configuration Menu.
3. Select Reset Roller Kit Counter from the Configuration Menu.
4. From the options displayed, select the roller kit to reset.
5. Select Yes to reset the roller kit counter value.

What does PC life warning mean on Lexmark printer?

Error messages A Photoconductor (PC) Life Warning or an 84 – PC Kit life message indicates that the photoconductor unit is near the end of its functional life and should be replaced soon. The recommended action is to replace the photoconductor unit or have an extra one in stock.

What does PC life mean?

A Photoconductor (PC) Life Warning or an 84 – PC Kit life message indicates that the photoconductor unit is near the end of its functional life and should be replaced soon.