Other

How do I reset my Hotpoint Ultima washing machine?

How do I reset my Hotpoint Ultima washing machine?

Locate the “On/Off” button. You can find the button on the left side of the control panel. Press and hold the “On/Off” button. Release the button after three seconds.

What is F error in washing machine?

The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won’t run at all.

Why does my Hotpoint Ultima keep beeping?

Indicates that the Hotpoint washing machine has considered the wash load to be excessive or unbalanced. We would recommend removing the clothes, redistributing the load evenly and retry the spin cycle to resolve this. Indicates that the Hotpoint washing machine has reached the end of a wash programme.

What does Hotpoint aqualtis error code F02 mean?

The Hotpoint Aqualtis error code F02 means “Motor jammed or tacho off”, and the technical advice is – “check motor and module connections”. This coincidentally is exactly the same fault that Hoover use for their Nextra washing machine. They use an error code 7 instead, but the fault is the same on both washing machines.

What are the error codes for a hotpoint washer?

Undo. Hotpoint Washer Error Codes. F01 – Electronic circuit board fault. F02 – Motor circuit fault. F03 – Temperature sensing fault. F05 – Waste pipe blockage or pump issue. F06 – Door lock fault.

What does error code F02 on Hoover Nextra mean?

They use an error code 7 instead, but the fault is the same on both washing machines. Rather than duplicate the advice, if you have error F02 on a Hotpoint Aqualtis then just read this article for an explanation of what it means – Hoover Nextra error code 7

Why does my hot point washer flash f-03?

My hotpoint washing machine has started to flash the code F-03 . The machine is at the start of cycle 4 and there is ? no water coming into machine … read more Hi, have got a hotpoint washing machine model wma62, that shows the keyhole symbol flashing continuously and beeping 5 times, this in turn does not allow the wash to begin.