How do I clear the error code on my HP printer?

To temporarily clear the error, reset the printer.

1. With the printer turned on, disconnect the power cord from the printer.
2. Unplug the power cord from the power source.
3. Wait 60 seconds.
4. Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.

How do I fix my HP error code?

Quick fix

1. Make sure the printer is turned on. You can also restart both the printer and your computer.
2. Check if the printer is connected to your computer or WI-FI network.
3. Make sure the paper try of your printer is loaded and that the printer has enough ink.
4. If the error still occurs, contact the HP printer support.

Why does my HP printer Say error code?

This error code can appear for a few reason such as cable issues, firmware errors or hardware faults. You can try the reset processes as stated at the top of the page, then if the error code still displays update the firmware, also try using different printer cables.

How do I fix HP printer Status error?

If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.

How do I fix printer error?

First, try resetting the printer. Turn the printer off, and then unplug it. Plug the printer back in, and turn it back on again. Resetting the printer is a simple resolution, but it might still be enough to resolve the issue for some users.

What is the error 49 on a HP printer?

Example – homepage for this printer: The Document HP LaserJet Pro and Color LaserJet Pro Printer and MFP – Troubleshooting 49.XXXX Errors Particularly if the solution for this thread is not the solution for your issue, Consider starting a new thread of your won.

Why do I get error 49 ff04 on my LaserJet p3015?

It has developed a condition where after it is powered on for a half hour or so, it displays Error 49.FF04 and will not print. I updated the firmware, no improvement. I disconnected it from the network, powered off, then on. Same behavior: OK at first, then got the same error. Planning to replace formatter board.

What to do if you get a 49 error?

Updating the firmware solves most 49 errors. If 49 errors continue to occur intermittently, contact HP Support. If the 49 error will not clear from the control panel, perform these steps in the order presented. If at any time the step clears the error, you do not need to continue troubleshooting.

How to upgrade firmware on HP LaserJet 4250?

To view instructions for upgrading the firmware and to download the firmware upgrade, go to http://www.hp.com/support/lj4250 or http://www.hp.com/support/lj4350. The printer is waiting for the command to print (such as waiting for a form feed, or when the print job is paused).