How do I access Nano M5?

Type 192.168. 1.20 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. The default username for your Ubiquiti NanoStation-M5 is ubnt. The default password is ubnt.

How do I connect my Nanostation M5 to my router?

Using Ethernet cables, connect the following:

1. Connect the LRS gateway to the “Secondary” port on the router.
2. Connect the “Main” port on the router to the “POE” port on the power adapter.
3. Connect the “LAN” port on the power adapter to your internet source (optional)

What is the use of Nanostation M5?

The Ubiquiti NanoStation M5 provides a secondary Ethernet port with software enabled PoE output for seamless IP Video integration. Remote hardware reset circuitry of Ubiquiti NanoStation M5 allows for device to be reset remotely from power supply location.

What kind of radio does The Nanostation M5 use?

not present Model O Operating Frequency E Ethernet Ports N NanoStation M2 2 2403-2475 MHz 2 2 N NanoStation M5 5 5170-5875 MHz* 2 2 N NanoStation Loco M2 2 2402-2482 MHz N NanoStation Loco M5 5 5170-5875 MHz* N

Where is the bridge mode nano station loco M5?

They are already linked to one another. The station is locked with AP’s ssid. Both are on the bridgemode and the static gateway is pointing to 192.168.1.1. From the AP side i can ping the station nano m5 of thw offsite, from the offsite i cant manage or ping even the gateway and nano AP.

Why is my nano station loco M5 not receiving internet?

Brief background: our network is using ISP router (192.168.0.x) connected to fortinet 60e firewall (192.168.1.1) connected to netgear poe switch where our nano station loco m5 (AP side) ver. 6 firmware is coonected (192.168.1.243) shooting a signal to an offsite nano station (station side) 192.168.1.244) to wireless router then clients on offiste.

What’s the user guide for the nano station 5?

User guide for NANOSTATION 5 1. Introduction. Nano Station 5 operates in IEEE 802.11a mode, while the Nano Station 2 operate in IEEE 802.11b/g modes. Before using your device, check the wireless mode you want to set-up in order to use the proper device. 2. Connecting hardware.