Can you rebuild ABS module?

There are a number of common ABS issues that can happen. An ABS module repair and return service is a service wherein the original part is rebuilt and does not need to be coded to your vehicle VIN.

Does a used ABS module need to be programmed?

The ABS module will need to be programmed once everything is installed. This procedure also will vary quite a bit depending on the manufacturer.

Is it hard to replace an ABS module?

An ABS module can be a difficult part to replace depending on the manufacturer’s design. You may need to reprogram and bleed the system if necessary.

Can you remove the ABS pump from a Saab?

A. Not if you have good access to the ABS pump/module. The module is held onto the pump with 6 torx screws. To gain access to the ABS module for removal, you may need to remove the battery / fusebox on some 9-5 models. Your next step is to unplug the power connecter. This connector has two wires going from the module to the rear of the pump.

Where can I get a module removed from my Saab?

I searched online for other companies that would do the work, and found two: Module Master out of Moscow, Idaho, who charge $159 for the repair. Their site is well made and actually has a very good tutorial on removing the module. The other company I found was Cheap ABS out of Charlottesville, VA.

What is the Bosch module number on a Saab 9-3?

The smaller Bosch 5.4 modules are found on many earlier Saab cars such as the 1998 900 and 1999 9-3. Common part numbers include 0273004223 and others. We can repair all Bosch 5.4 modules with communication problems.

Is there a repair and return service for ABS?

ABS/EBCM Module Repair & Return (Like New, Only Better) This is a repair and return service where the module is rebuilt, tested, and shipped back. MyAirbags will rebuild your original part to make it as good as new! You will not need your ABS module coded to your vehicle VIN because it is the original module.