Are Miller Thunderbolt welders any good?

The quality of welds with the stick welder were only fair at best. I bought a LIncoln 175 wire feed and so far it’s handled every challenge I’ve given it with no problem. I still consider myself a novice and for me the wire feed is much easier to use and I get much better quality welds.

Can you TIG weld with a Miller Thunderbolt?

Anyway, this company used strictly Miller Thunderbolt DC stick welders hooked up to tig torches and argon because they knew when they tossed them in the truck and drove to a job site…they would work when they fired them up.

What is the best arc welder for home use?

The 10 Best Stick Welders:

1. Lotos LTPDC2000D 3-in-1 Stick Welder – Best Overall.
2. EVERLAST PowerARC 140 TIG / Stick Welder.
3. Amico ARC-160D Stick Welder – Best Value.
4. Hobart 500571 Stickmate 210i Stick Welding Machine.
5. HITBOX 160A Inverter Arc & Stick-Welder.
6. Forney Easy Weld 298 Arc Welder.

Can you TIG weld with a AC DC stick welder?

Short answer: Yes, you can turn any DC welder into a stick welding machine, given that you buy a TIG torch and an Argon bottle. Especially when starting off in TIG welding, or maybe even just for giving it a try, TIG welding with a stick welder might be an option to tip your toe in the game.

Is AC or DC welding better?

DC stick welding offers advantages over AC when welding steel, including smoother and more stable arcs, easier starts, fewer arc outages, less spatter and easier vertical up and overhead welding. DC positive polarity provides a high level of penetration into the steel.

Is arc better than MIG?

The arc, created by an electrical current between the base metal and the wire, melts the wire and joins it with the base, producing a high-strength weld with great appearance and little need for cleaning. MIG welding is clean and easy and can be used on thin or thick metals.

Is stick welding stronger than MIG?

Quality of Weld Despite being good for thicker plates, stick welders are not ideal for thin metal projects. The E70s6 bare wire used in MIG and 7018 stick used in stick welders are both equally strong. They have a 70,000 psi tensile strength, which is stronger than most steels that you will work with.

Is the ground positive or negative on a welder?

Positive Polarity (DCEP) #1 Choice Stick electrodes are generally run with a positive polarity (DCEP). With this setup, your electrode holder (stinger) has a positive current flowing to the stick electrode (also just called a “rod”). Your ground lead will be attached to the negative terminal of your machine.

How do you know what welding rod to use?

First, select a stick electrode that matches the strength properties and composition of the base metal. For example, when working on mild steel, generally any E60 or E70 electrode will work. Next, match the electrode type to the welding position and consider the available power source.

Where can I buy a Miller Thunderbolt 225?

I have a Miller Thunderbolt 225 amp A/C welder for sale. Unit is in A-1 condition and includes cables, helmet, and some welding rod. Call 306 784 2627

How many amps does a thunderbolt XL welder have?

Technical Specs 1 Item Ac/Dc Stick Welder 2 Series Thunderbolt XL 225/150 AC/DC 3 Input Voltage 230 4 Polarity AC/DC 5 Amps AC 225 6 Amps DC 150 7 Welding Processes Stick 8 Rated Output 225 A at 25V AC, 20% duty cycle (DC) 9 Duty Cycle 20% 10 Input (Amps) 47.5

What should the weld receptacle be on a thunderbolt 225?

Controls Amperage Control Amperage Range Indicator Electrode (30–150 A) Weld Output Receptacle Electrode (40–225 A) Weld Output Receptacle When welding below 150 amps, use 30–150 A receptacle. Work Weld Output Receptacle Power Switch Ref. ST-155 574 / Ref. SC-107 516-F 3-2. SECTION 4 – MAINTENANCE & TROUBLESHOOTING 4-1.

How much is a Miller welder 225 in Canada?

Miller Welder 225 | Kijiji – Buy, Sell & Save with Canada’s #1 Local Classifieds. REDUCED PRICE: NOW $150 Includes welding shield, common welding tools, and 30 feet of heavy duty cable, with hand whip and ground.