Where is the thermostat located on a 2008 Malibu?

The thermostat in the 2008 Chevy Malibu with the 3.6-liter is in the engine compartment. If You look at the point where the upper radiator hose attaches to the engine, You’ll find it there. There should be a few bolts and a rubber gasket keeping it in place. There are a few telltale symptoms of a failing thermostat.

Where is the thermostat located on a 2005 Chevy Malibu?

The 2005 Chevy Malibu thermostat is in the thermostat housing on the lower coolant line. The thermostat is what measures the temperature of the coolant running through the line, and from there it can determine what temp the engine is running at.

Where is the thermostat located on a 2006 Chevy Malibu?

To locate the housing, follow the upper radiator hose to the engine head. The hose connects to the T-Stat housing. Lift the T-Stat housing upward and remove the thermostat from the engine head.

Is the Chevy Malibu coolant thermostat too low?

The fan can come on at any time. P0128 is not a serious threat to the immediate drivability of your Malibu. It should be noted that most modern fuel injected engines to like to run at 200+ degrees. Letting them run too cool can problems after an extended period of time.

Why is the heater on my Chevy Malibu not working?

Lack of heat – The biggest symptom of the P0128 trouble code in the Chevy Malibu is going to be lack of heat. When the thermostat doesn’t bring the engine all of the way up to the proper operating temp, it means that the water going through the heater core isn’t as hot.

Why does my Chevy Malibu have trouble code p0128?

Lack of heat – The biggest symptom of the P0128 trouble code in the Chevy Malibu is going to be lack of heat. When the thermostat doesn’t bring the engine all of the way up to the proper operating temp, it means that the water going through the heater core isn’t as hot. This leads to less/no heat.

Where does the radiator hose meet the thermostat?

Also, a mechanic will typically check under the hood where the radiator hose meets the thermostat housing. If it is easy to pinch the hose, typically water will be flowing through it. If you pinch your hose make sure that you are aware of the belted accessories and the fan.