Guidelines

What size is oversized bars?

What size is oversized bars?

Generally, oversized bars has an internal diameter of 32mm and an external diameter of 35mm. these bars are made for HIC compression and work with oversized clamps and forks, as well as standard forks. They can also be used for SCS compression clamps.

Are MGP bars oversized?

The MFX Aero Alloy Bar is a super lightweight alloy oversized bar coming in a huge 24” wide by 25” tall. The MFX Aero Alloy Bar can be run on both SCS and IHC compression systems. Thick sidewalls and gussets ensure these bars will stand up to the abuse dished out by todays pro riders.

Do you need oversized bars for IHC?

To be installed including a top cap and bolt for the actual compression mechanism to work. HIC can only work with oversized bars adding to the strength of larger/heavier scooters in the market. HIC/SCS forks are thicker than IHC, adding to the overall strength.

Can oversized bars fit IHC?

Answer: You might technically be able to get oversized bars to fit IHC by using the IHC shim and the HIC shim, but that would create a very unstable system. I do not recommend going with this method. If you want to use oversized bars, you need a standard fork and HIC or full-size SCS.

Are aluminum scooter bars good?

Aluminum bars are popular for those wanting to have a light scooter. However,¾Aluminum bars are far from perfect; its major flaw is their durability, proving susceptible to bends and snaps. ¾Aluminum bars are commonly used among park riders wanting to minimize the weight of a scooter.

How wide should your scooter bars be?

The width of your scooter bars should be around the width of your shoulders. For example if your shoulder width is 18 inches you won’t want to ride with 12 inch bars, they will look and feel way too small. You can have bars 1 inch wider or narrower than your shoulders and they will feel ok.

Does IHC fit oversized bars?

How tight should IHC compression be?

Next put the HIC/IHC shim on your fork and tighten it with your 5mm allen key. Tighten it to the point where it goes around about one spin when you spin the front wheel with your hand. You want your compression to be super tight if you want a dialed scooter.

Whats the difference between standard and oversized bars?

What is the difference between “standard” bars and “HIC/Oversized” bars? Bars are made out of either chromolly or aluminium. Aluminium bars are manufactured with a thicker wall than chromolly bars, so they have a standard internal diameter, but an oversized external diameter.

What is the strongest material for scooter bars?

¾Aluminum bars are commonly used among park riders wanting to minimize the weight of a scooter. ¾Steel bars are stronger than aluminum but significantly heavier. Steel bars are used by large park riders or street riders who would bend or break aluminum bars.

How much do ethic dryade bars way?

Technical Details

Product Dimensions ‎62 x 5 x 63 cm; 780 Grams
Size ‎24.5″
Length ‎62 centimeters
Brand ‎Ethic
Item Weight ‎780 g

How tall should my bars be?

The standard bar height from the floor to the top of a bar top (excluding the bar rail) should be 42”. This allows for a standard 30” high bar stool to seat you comfortably at your bar.