What is Zone 1 and Zone 2 in flight?

Zone 1 fliers have paid for a carry-on bag. Zones 2 through 4 go from the rear of the plane to the front. A passenger purchasing a carry-on bag gets Zone 1 boarding. Families with children under the age of 3 board after Zone 1 but before Zone 2.

What determines your zone on an airplane?

AirTran boards their planes in zones, but the zones are assigned by seat location and rotate back and forth. The first to board are business class and then a zone in the back of the plane followed by a zone in the front of the plane. This back and forth is rotated until the plane has completely boarded.

What is Zone 2 in Go Air?

Next is Zone 2. This is considered “general” status. If you have no loyalty status and don’t pay extra, you’ll usually board with this group. Sometimes, there is a Zone 3.

What’s the difference between Zone 1 and Zone 2?

Zone 1 is an area that is classified ‘as a place in which an explosive atmosphere consisting of a mixture with air or flammable substances in the form of gas, vapours and mists is likely to occur occasionally during normal operation’, whereas Zone 2 is an area

How is the zoning of large aircraft determined?

Zoning of large aircraft is specified by the Air Transport Association of America in the ATA-100 Specification. A zone is identified by one of three indicators, depending upon whether it is a major zone, major sub-zone, or simply a zone. Major zones are identified by three digit numbers as follows: Major Zone Area. No.

Where are Zone 1 and Zone 3 passengers?

Zone 1 passengers have purchased carry-on bags; Zone 3 fliers are toward the back of the plane; Zone 4 fliers are toward the front of the plane. Preboarding: Passengers with disabilities and those traveling with children under the age of 2.

What is Class 1 Division 2 and ATEX Zone 2?

Assured Systems sell a wide range of industrial computing products certified for Class 1 / Division 2 and ATEX Zone 2 areas. Assured Systems sell a wide range of industrial computing products certified for Class 1 / Division 2 and ATEX Zone 2 areas. Explosions can cause significant damage along with severe injury or worse loss of life.