What is the hardness of Hardox 400?

400 HBW
Hardox® 400 is an abrasion-resistant steel with a nominal hardness of 400 HBW. Hardox® 400 is an all-around wear resistant steel. Thanks to its high toughness, good bendability and weldability, this steel can be used in structures with moderate wear.

What is the hardness of Hardox?

Hardox® Extreme is the world’s hardest wear plate with a nominal hardness of 60 HRC (Rockwell) and typical hardness of 650-700 HBW.

Is Hardox brittle?

Still, those forming properties are good only compared to other wear-resistant steels and inferior to regular ones. With higher grades, the brittleness factor increases along with hardness. This means that using Hardox as wear plates is a good option.

Can you heat treat hardox?

Hardox 400 is not intended for further heat treatment. It has obtained its mechanical properties by quenching and when necessary by means of subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 250ºC .

What is the hardness of the HARDOX 400?

Data sheets HARDOX 400 UK Data Sheet: HARDOX 400 ABRASION RESISTANT PLATE HARDOX 400 is an abrasion resistant plate with a hardness of 400 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. HARDOX 400 offers very good weldability.

What kind of steel is HARDOX 450 HBW?

Hardox® 450 is an abrasion-resistant steel with a nominal hardness of 450 HBW. Hardox® 450 combines good bendability and weldability with an option for guaranteed impact toughness (Hardox® 450 Tuf).

What are the properties of HARDOX and Strenx?

4 TYPICAL PROPERTIES FOR HARDOX AND STRENX Hardness in Brinell (HBW) Hardness in Rockwell (HRC) Tensile strength, Rm (N/mm2) Strenx 700 ~260 ~300 ~320 ~430 ~500 ~350 ~400 ~450 ~500 ~550 ~600 ~675 ~24 ~29 ~32 ~43 ~49 ~35 ~40 ~44 ~49 ~52 ~55 ~62 ~860 ~935 ~990 ~1340 ~1580 ~1080 ~1250 ~1400 ~1580 ~1760 ~1940 Strenx 900 Strenx 960 Strenx 1100

Which is the best HARDOX for cold bending?

HARDOX 400 is an abrasion resistant plate with a hardness of 400 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. HARDOX 400 offers very good weldability.

https://www.youtube.com/watch?v=R4cma-PwymU