What is DTM acrylic coating used for?

Pro Industrial DTM Acrylic coating is an interior-exterior, water based, corrosion resistant acrylic coating for light to moderate industrial use. Designed for new construction or maintenance use and can be used directly over prepared substrates.

How do you apply acrylic DTM coating?

O’Leary DTM Acrylics can be applied by brush, roller, air-atomized or airless spray at up to 425 sq ft per gallon. Apply these coatings when material, air and surface temperatures are between 55°F and 100°F. The substrate must be at least 5°F above dew point. Relative humidity should be below 90%.

What does DTM paint stand for?

Direct-To-Metal
Direct-To-Metal (DTM) is a type of paint or coating used on metal surfaces. Direct-To-Metal coatings have an acrylic composition that allows them to successfully adhere to a metal surface when directly applied.

Who makes DTM paint?

USSC
USSC manufactures a whole range of DTM paints to form an extremely strong bond to all metal surfaces, ferrous / on ferrous, galvanized metal, previously painted metal surfaces, iron, steel, metal structures and many other substrates.

Is acrylic a DTM?

DTM Acrylic coATing is a 100% acrylic, water reducible, corro- sion resistant coating for light to moderate industrial use. Designed for new construction or maintenance use and can be used directly over prepared substrates.

Does DTM paint stick to aluminum?

DTM acrylic is a great product on most metal surfaces and some types of aluminum, but in some cases a speacial tie coat or a wash/etching primer should be used to promote good adhesion. Aluminum protects itself through a process called passivation which may leave a film of oxide with low adhesion on the surface.

Does DTM paint need primer?

PR: Since DTM products don’t require a primer, you’re only applying one coat versus two. Not only is there the reduction in an entire coat but the opportunity for over-spray is also reduced, further eliminating wasted material.

What is the best DTM paint?

We recommend using a DTM (direct-to-metal) product that is especially formulated for this type of work. We recommend Super Spec HP DTM by Benjamin Moore, a product we frequently work with.

Is DTM paint good for wood?

Can be used on galvanized and aluminum metal Acrylic DTM Enamel is a tough waterborne acrylic enamel that fights rust on metal and provides a smooth, durable finish on wood, drywall and masonry substrates.

What paint is best for aluminum?

What kind of paint should I use when painting aluminum siding? Exterior acrylic latex paint is the best choice for painting aluminum siding.

Will DTM paint stick to wood?

Which is better epoxy or acrylic?

Cure time is the most significant difference between the two types of adhesives. Some users assume that an epoxy adhesive is preferable only for warmer climates, whereas an acrylic is a cold-climate adhesive….Epoxy vs. Acrylic Adhesive Systems: Which Is Right for Me?

What can pro industrial DTM acrylic be used for?

Formulated for interior/exterior applications for light to moderate industrial use, Pro Industrial™ DTM Acrylic is designed for new construction or maintenance use and can be used directly over prepared substrates. Interested in learning more or purchasing this product?

What kind of coating is pro industrial acrylic?

Pro Industrial DTM Acrylic. Pro Industrial DTM Acrylic Coating is an interior/exterior, water-based, corrosion resistant acrylic coating for light to moderate industrial use. Designed for new construction or maintenance use and can be used directly over prepared substrates.

Can you use Sherwin Williams acrylic over prepared substrates?

Designed for new construction or maintenance use and can be used directly over prepared substrates. Your options may be adjusted based on color selection. All prices displayed are for U.S. Sherwin-Williams locations and are in U.S. Dollars.