What is a ride height valve?

Air Suspension Control Valves are used to automatically control the vehicle’s ride height by inflating and deflating the air suspension bellows to adjust for variations between loaded and unloaded vehicles.

How does an air ride dump valve work?

Air is dumped from the air bags without affecting the air pressure in the air supply. When the pilot valve is shifted to the Travel position, air pressure is removed from the HCV dump valves. This allows the dump valves to return to the Travel position. The HCV can now inflate or deflate the air bags as needed.

How does a ride height valve work?

This valve is typically mounted to the vehicle frame and connects to the suspension lower member with a signal link. As the suspension raises and lowers, the valve ‘reads’ the height of the suspension and adds air to or removes air from the air springs.

What is an air dump valve?

An Air Dump Valve allows the operator to completely exhaust – “dump” – the air from the trailer’s air suspension springs, often to facilitate the loading or unloading of the trailer.

What does Susp dump mean?

When the SUSP/DUMP switch is in the DUMP position. andthevehiclespeedisbelow5mph(8km/h),air. supplied to the rear air suspension is released, lowering the frame for loading. Placing the switch in the SUSP position causes air to fill or remain.

How many valves do I need for air ride?

This will require a total of 8 valves. Installing them in this manner will give you independent airbag control, or FBSS (Front, Back, Side, Side) control depending on your controller or wiring method.

Can you drive fast with air suspension?

Miles car puts down around 500 wheel horsepower, but can air suspension handle more power? The answer is yes, yes it can. Fullford has set a record as one of the fastest Chargers in the world, but also one of the fastest Air Lift-equipped cars in the world.

Which is height control valve for dump facility?

Height Control Valve – Fast Instant repsonse with dump facility, fitting and link kits. Height Control Valve -Fast Instant repsonse, valve only.

How does a Ridewell height control valve work?

GENERAL INFORMATION Ridewell Height Control Valve (HCV) is a mechanical device that automatically adds to, or exhausts, air from the air suspension when changes in vehicle load are detected. The HCV will respond to dynamic changes, but does so by limiting air consumption for small changes in suspension height.

What is a height control valve ( HCV )?

Manual # 9710008 Rev. G. The07/09 Height Control Valve Installation & Operations Guide GENERAL INFORMATION Ridewell Height Control Valve (HCV) is a mechanical device that automatically adds to, or exhausts, air from the air suspension when changes in vehicle load are detected.

What kind of air dump valve do I Need?

. 1/4″ NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON (Standard USA Pipe Thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by U.S. Solid. . . Only 11 left in stock – order soon.