What is a quick change tool post used for?

Tool posts can be used to hold tools for turning and facing, boring, and knurling. Quick change tool posts are specifically designed for the mini lathe and may include a tool post and tool holders.

How is swing measured on a lathe?

Swing indicates the maximum diameter workpiece you can turn on a lathe. Measure from the top of the bed to the center of the spindle and then double that value.

What does the tool post do on a lathe?

A tool post is the part on a lathe that holds the cutting tool securely during machining operations. The post then bolts onto the compound rest via a conventional hex or Allen head bolt or a quick release locking mechanism.

What are the benefits of quick change Adaptors?

“With a quick-change system, you can have a set of cutting tools preset to the same dimension, ready to go. So you just take out that tool and put another one in—and there’s no downtime involved.”

In which tool post more than one tool can be set?

Explanation: Four tool post provides firm supports for both single or double tool set up. In this tool post, each tool is secured in the tool post by more than one bolt and so the rigidity is more. 12.

What does swing over bed mean on lathe?

Swing over bed. The diameter of the largest workpiece that can be rotated on the spindle without hitting the bed. This is the first of the two numbers used to describe the size of a metal lathe. In the case of the 7×10 or 7×12 lathes, it is 7″.

What are quick change tool post and holder sets?

“Phase II quick change QC tool post sets advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances.

What’s the smallest size for a tool post?

These are sometimes referred to as “Phase II” tool posts because Phase II was the first to import a copy of the Aloris tool post from China. In general, tool posts and tool holders are interchangeable in each size range. For example, pretty much any AXA tool holder will fit any AXA tool post. The 0XA is the smallest of the three sizes.

Which is quick change tool post for Mini lathes?

This quick change tool post set bolts on to 7×10, 7×12, 7×14, and 7×16 mini lathes with no additional hardware. PN 3048 has a cut-off tool holder that holds the cut-off blade at the standard 4° angle.

Where to install Quick Change QC tool sets?

Quickly and easily installed on an engine bench or turret lathe Phase II quick change QC tool post sets perform a wide range of operations from fine precise work to heavy duty cutting. All parts are hardened, ground and completely sealed for maintenance free operation. Maximum rigidity for chatter free performance.