What is a chainring bash guard?

Bash guards are used on gravity and trail bikes to prevent rocks, logs and other trail or racetrack obstacles from damaging chainrings. They usually consist of circular discs attached to the chainset in place of the large chainring, and are built of tough aluminium or polycarbonate that can absorb impacts.

Do I need a bash guard on my mountain bike?

Another major benefit to running a chain guide is having the option of mounting a bash guard. If you were to come up short on a jump, or land directly on top of a tall rock, the bash guard is there to protect your drivetrain and keep your bike rolling.

Is a chainring guard necessary?

It is not necessary to install a chain guard on your bike. The guard will protect your trousers and shoelaces from getting caught in the chain and sprockets.

What size chainring guard do I need?

You can use any size bash you want, it should at least be the same size as the largest ring you plan on using. You can use a 36 tooth bash on a 32 tooth chainring if you want. Keeping them the same gives a cleaner look, and it’s really not necessary to go larger than the ring your running.

How do bash guards fit?

GUIDE SETUP INSTRUCTIONS

1. Set chainring size tighten bolt to 3Nm.
2. Hold backplate directly against ISCG05 tabs.
3. Rotate backplate until flat is horizontal and torque bolts to 5Nm.
4. With crankset and chain installed, use spacer shim block to measure clearance between back plate and chain.

How important is a bash guard?

Bash guards serve one important purpose, they protect your chain and chainring from being attacked from rocks below. These bolts were designed specifically to attach bash guards and chain guides to the frame. Bash guards that attach to these tabs have become the new popular standard.

What is purpose of chain guard?

A gear case, also known as a chain case or chainguard, is an enclosure for the bicycle chain and sprocket assemblages commonly employed by utility bicycles. It serves to protect the cyclist from being soiled or trapped in the chain rings and tends to fully enclose the drive train.

What is a chain stay?

What is the chainstay? The chainstay or “stays” = The pair of frame tubes that joins the bottom bracket shell to the rear axle holders (the slots the back wheel goes in). This means that the chain stays connect the bottom bracket (BB) to the center of the back wheel.

How do you put on chain guards?

Instructions: Installing Chain Guard on Alpha One and Alpha Two

1. Step 1: Identify the parts.
2. Step 2: Put the shims inside the brackets.
3. Step 3: Attach the down tube bracket.
4. Step 4: Attach Rear Bracket.
5. Step 5: Attach chain guard to brackets.
6. Step 6: Position the chain guard and tighten.

What is a bash ring?

Bashring. In cycling, bashrings are a protective ring, often made of aluminium or polycarbonate, mounted on the outer part of the chainrings on mountain bikes. They are commonly used on downhill and freeride bikes to protect the chain and chainring in cases of it hitting rocks and other obstacles.

What do bash guards do on a bike?

Bash guards are used on gravity and trail bikes to prevent rocks, logs and other trail or racetrack obstacles from damaging chainrings. They usually consist of circular discs attached to the chainset in place of the large chainring, and are built of tough aluminium or polycarbonate that can absorb impacts.

Which is the best chainring guard for mountain bikes?

Eboxer Bicycle Chainring Guard,BCD 104 Mountain Bike Steel Single Crank Chain Ring Repair Parts,Easy to Install and Fits for Long Time Use. . . . . .

When to use Bash rings on a bike?

Bash rings are often used in conjunction with chainguides on bikes designed for high-octane, big-hit riding such as Downhill (DH) and enduro racing, slopestyle and freeride (FR), but lightweight and smaller-sized versions (e.g. ‘taco guards’) are also becoming more common on general trail bikes. Don’t want to read our in-depth guide?

When does eboxer mountain bike chainring Guard come out?

. . . . . . In stock on May 7, 2021. Eboxer Bicycle Chainring Guard,BCD 104 Mountain Bike Steel Single Crank Chain Ring Repair Parts,Easy to Install and Fits for Long Time Use.